RT-Thread-ART-Pi Smart 开发板开箱及爱之初次体验RT-Thread问答社区

ART-Pi Smart 开发板开箱及爱之初次体验

发布于 2022-04-23 23:48:25 浏览：1276 订阅该版

[tocm]

# ART-Pi Smart 开发板开箱及爱之初次体验

首先， 感谢RT=Thread给的试用机会, 感谢熊大的指导．
本文ART-Pi Smart开箱及初次体验内置应用

## 开箱

收到有几天了。我们一步一步揭开他的面纱吧

主板包装精美严实，但需要保护的屏反而包装简单了
![ART-piSmart5.jpg](https://oss-club.rt-thread.org/uploads/20220423/4493cf37bfc81790bcdfa170fcf60c68.jpg.webp)

开箱后，包装内全家福，包装内自带了两根 Type-C 线和一根网线。开发板整体接口还是很丰富的：SDIO、USB、ETH、LCD、Camera。

![ART-piSmart4.jpg](https://oss-club.rt-thread.org/uploads/20220423/1a3207b1f87fd1787ccf6687e66af7ca.jpg.webp)
![ART-piSmart3.jpg](https://oss-club.rt-thread.org/uploads/20220423/776bfbfe46f034b132df63fb7b36fbac.jpg.webp)
![ART-piSmart.jpg](https://oss-club.rt-thread.org/uploads/20220423/a7e331dff436d650a4449df5cb7399d5.jpg.webp)

### 屏组装后效果

![ART-piSmart1.jpg](https://oss-club.rt-thread.org/uploads/20220423/6f6fe6bd5461d90f8d37ffe6841ade7d.jpg.webp)

## ART-Pi Smart 开发板简介

ART-Pi Smart 开发板是RT-Thread联合百问科技出品，用于学习和评估RT-Thread Smart微内核操作系统。

gitee 文档代码仓库地址 ：https://gitee.com/rtthread/ART-Pi-smart

###    板载资源:
    - i.MX6ULL, Cortex-A7, 800MHz
    - DDR3 SDRAM 512MB, EMMC(4GB)
    - RW007 WiFi
    - SDIO TF Card slot
    - USB Host
    - USB OTG with Type-C
    - Ethernet port x1
    - USB UART x1
    - RGB888 FPC connector
    - Camera FPC connector
    - D1 for 3.3 v power-on
    - Two user LEDs
    - Three push-buttons (user, reset and boot)

###   驱动支持:
    - GPIO
    - UART
    - I2C
    - SPI
    - QSPI
    - RTC
    - TIMER
    - PWM
    - SDRAM
    - ETH
    - WIFI
    - LCD

## 上电

插入 Type-C (两条Type-C线都插上)电源和网线，打开终端，波特率设置为 115200
 
    上电调试信息：

```
U-Boot 2017.03-g002b758ac9-dirty (Nov 24 2021 - 20:08:02 +0800)
     
     CPU:   Freescale i.MX6ULL rev1.1 696 MHz (running at 396 MHz)
     CPU:   Industrial temperature grade (-40C to 105C) at 38C
     Reset cause: WDOG
     Model: Freescale i.MX6 ULL 14x14 EVK Board
     Board: MX6ULL 14x14 EVK
     DRAM:  512 MiB
     MMC:   FSL_SDHC: 0, FSL_SDHC: 1
     *** Warning - bad CRC, using default environment
     
     Display: TFT7016 (1024x600)
     Video: 1024x600x24
     In:    serial
     Out:   serial
     Err:   serial
     switch to partitions #0, OK
     mmc1(part 0) is current device
     Net:   eth1: ethernet@020b4000, eth0: ethernet@02188000 [PRIME]
     Normal Boot
     Hit any key to stop autoboot:  0
     reading /kernel/rtthread.bin
     1149312 bytes read in 73 ms (15 MiB/s)
     ## Starting application at 0x80001000 ...
     
      \ | /
     - RT -     Thread Smart Operating System
      / | \     5.0.0 build Dec 15 2021
      2006 - 2020 Copyright by rt-thread team
      lwIP-2.1.2 initialized!
      [15] E/drv.enet: emac device init success
     
      [20] I/I2C: I2C bus [i2c3] registered
      [24] I/I2C: I2C bus [i2c4] registered
      [83] E/drv.enet:
      PHY Link down, please check the cable connection and link partner setting.
     
      [94] I/SDIO: SD card capacity 31166976 KB.
      [156] I/SDIO: emmc card capacity 3817472 KB.
      found part[0], begin: 2098176, size: 500.0MB
      found part[1], begin: 526386176, size: 1.0GB
      found part[2], begin: 1600128000, size: 10.0MB
      found part[3], begin: 1610613760, size: 200.0MB
      [266] I/touch: rt_touch init success
      [270] I/gt911: touch device gt911 init success
      [275] I/sal.skt: Socket Abstraction Layer initialize success.
      emmc file system initialization done!

[1751] E/[RW007]: The wifi Stage 1 status 0 0 0 1
[1758] I/WLAN.dev: wlan init success
[1763] I/WLAN.lwip: eth device init ok name:w0
[1768] I/WLAN.dev: wlan init success
[1773] I/WLAN.lwip: eth device init ok name:w1

rw007  sn: [rw00700000000fc584a2c5001]
rw007 ver: [RW007_2.1.0-a7a0d089-57]

[5247] D/drv.enet: enet1 link up

[5789] W/WLAN.mgnt: F:rt_wlan_connect L:1091 not find ap! ssid:rt-thread
hello rt-smart!
/sd/wifi.sh wi-fi configuration file not exist in sd card!
[5807] I/mcf.link.tcp: TCPServer Waiting for client on port 5555...

[5814] I/mcf.link: MCF link port(3) register successfully.
msh />[5850] I/mcf.trans: MCF(V0.1.0) initialized successfully.
[5855] I/urpc: uRPC(V0.1.0) initialize successfully.
[5861] I/mcf.trans: MCF protocol started successfully.
```

在终端输入命令 help (tab键，用法与)查看帮助信息(会列出相关应用)

```
msh />help
    RT-Thread shell commands:
    reboot           - reboot system
    cpu_usage        - display cpu usage
    dbg              - dbg
    memcheck         - check memory data
    memtrace         - dump memory trace information
    gic_dump         - show gic status
    list_page        - show page info
    list_fd          - list file descriptor
    lsof             - list open files
    mount            - mount<device><mountpoint><fstype>
    unmount          - unmount the mountpoint
    hello            - say hello world
    clear            - clear the terminal screen
    version          - show RT-Thread version information
    list_thread      - list thread
    list_sem         - list semaphore in system
    list_event       - list event in system
    list_mutex       - list mutex in system
    list_mailbox     - list mail box in system
    list_msgqueue    - list message queue in system
    list_memheap     - list memory heap in system
    list_mempool     - list memory pool in system
    list_timer       - list timer in system
    list_device      - list device in system
    list             - list all symbol in system
    help             - RT-Thread shell help.
    ps               - List threads in the system.
    free             - Show the memory usage in the system.
    ls               - List information about the FILEs.
    cp               - Copy SOURCE to DEST.
    mv               - Rename SOURCE to DEST.
    cat              - Concatenate FILE(s)
    rm               - Remove(unlink) the FILE(s).
    cd               - Change the shell working directory.
    pwd              - Print the name of the current working directory.
    mkdir            - Create the DIRECTORY.
    mkfs             - format disk with file system
    df               - disk free
    echo             - echo string to file
    set              - set or show environment variable
    list_channel     - list IPC channel information
    list_process     - list process
    kill             - send a signal to a process
    killall          - kill processes by name
    list_shm         - show share memory info
    sys_log          - sys_log 1(enable)/0(disable)
    ifconfig         - list the information of all network interfaces
    ping             - ping network host
    dns              - list and set the information of dns
    netstat          - list the information of TCP / IP
    pwm_enable       - pwm_enable pwm1 1
    pwm_disable      - pwm_disable pwm1 1
    pwm_set          - pwm_set pwm1 1 100 50
    date             - get date and time or set [year month day hour min sec]
    wifi             - wifi command.

```
    执行用户 app。用户 app 存放在目录 /root/bin 目录下
   
```
msh /root/bin>pong.elf &
    msh /root/bin>
    Pong: wait on the IPC channel: 3

msh /root/bin>ping
    msh /root/bin>ping.elf
    msh /root/bin>
    Ping: send count = 0
    Pong: receive count = 0
    Pong: reply count = 0
    Ping: receive the reply 0

Ping: send count = 1
    Pong: receive count = 1
    Pong: reply count = 1
    Ping: receive the reply 1

Ping: send count = 2
    Pong: receive count = 2
    Pong: reply count = 2
    Ping: receive the reply 2

Ping: send count = 3
    Pong: receive count = 3
    Pong: reply count = 3
    Ping: receive the reply 3

Ping: send count = 4
    Pong: receive count = 4
    Pong: reply count = 4
    Ping: receive the reply 4

Ping: send count = 5
    Pong: receive count = 5
    Pong: reply count = 5
    Ping: receive the reply 5

Ping: send count = 6
    Pong: receive count = 6
    Pong: reply count = 6
    Ping: receive the reply 6

Ping: send count = 7
    Pong: receive count = 7
    Pong: reply count = 7
    Ping: receive the reply 7
```
    
### 连接网络
    
#### 扫描wifi SSID
```
msh />wifi scan
             SSID                      MAC            security    rssi chn Mbps
------------------------------- -----------------  -------------- ---- --- ----
SunWIFI                         48:0e:ec:cf:50:75  OPEN           -29    7 4294
SunshineSilicon                 4e:0e:ec:cf:50:75  WPA2_MIXED_PSK -30    7 4294
DIRECT-09SCX-3400               02:15:99:a0:b1:56  WPA2_AES_PSK   -54    7 4294
YYH401                          c0:b4:7d:90:a4:68  WPA2_AES_PSK   -71    6 4294
SunshineSilicon                 cc:08:fb:19:74:7e  WPA2_AES_PSK   -73    1 4294
TP-LINK_12F0                    04:95:e6:f1:bd:51  WPA2_AES_PSK   -73    3 4294
360WiFi-501                     a8:6b:7c:c8:35:a2  WPA2_AES_PSK   -73   11 4294
ChinaNet-Ut5M                   08:6b:d1:fb:49:d0  WPA2_MIXED_PSK -73   11 4294
DIRECT-2a-Pantum P2200 Series   14:6b:9c:e7:28:ed  WPA2_MIXED_PSK -75   11 4294
huawei-惠惠                   ac:bd:70:d5:2b:2c  WPA2_AES_PSK   -76    6 4294
ChinaNet-sGGV                   cc:90:e8:39:c9:a5  WPA2_MIXED_PSK -79    5 4294
yys                             c8:5b:a0:ef:13:94  WPA2_AES_PSK   -79   11 4294
WirelessNet                     50:1d:93:68:f4:d0  WPA2_MIXED_PSK -80    1 4294
MERCURY_A34C                    5c:de:34:9a:a3:4c  WPA2_AES_PSK   -81   11 4294
ChinaNet-2.4G-0770              fc:60:9b:12:07:72  WPA2_MIXED_PSK -83    1 4294
嘉源轩                       30:a2:c2:78:8d:ba  WPA2_MIXED_PSK -84    1 4294
ChinaNet-xmPj                   18:52:82:40:78:9d  WPA2_AES_PSK   -84    8 4294
ChinaNet-2.4G-6646              ac:e3:42:a0:66:4c  WPA2_AES_PSK   -86   11 4294
502                             b8:80:35:c0:57:07  WPA2_AES_PSK   -87   11 4294
TP-LINK_AB70                    54:a7:03:b2:ab:70  WPA2_AES_PSK   -87   11 4294

### 选择要连接的WIFI
```
msh />wifi join SunshineSilicon ********************
[274154] I/WLAN.mgnt: wifi connect failed!
msh />wifi join SunshineSilicon ********************
[283828] I/WLAN.mgnt: wifi connect failed!
msh />wifi join SunshineSilicon ********************
[288510] I/WLAN.mgnt: wifi connect failed!
msh />wifi join SunshineSilicon ********************
[294185] I/WLAN.mgnt: wifi connect failed!
```

连接wifi 基本失败，好像过很久 自动会连接上
```
msh /root>[4864107] I/WLAN.mgnt: wifi connect success ssid:SunshineSilicon
[4868116] I/WLAN.lwip: Got IP address : 192.168.0.67

```
插网线后， 获取IP，也比较慢

## Web网页管理体验

看到上面连接成功的IP192.168.0.67

打开网页http://192.168.0.67

### 登录

![weblogin.png](https://oss-club.rt-thread.org/uploads/20220424/59307bd8f261f37362aa1b03a7b5f351.png)

登录比较慢

### 登录后
![smart-web.png](https://oss-club.rt-thread.org/uploads/20220424/8ca1b65cc1961a2b5b93a8354b8e547c.png.webp)

界面像路由路管理页面

### 点亮LED

右键菜单LED功能

图片

## LED 屏体验

下载sdl_test

RT-Thread官方编译好示例下载：https://gitee.com/rtthread/ART-Pi-smart/tree/master/documents/firmwares/root/bin

传应用及图片到开发板

本想用udb　push到板子上，几次尝试，都失败，还是用古法，下载到SD卡，断电插卡，再重新上电

切换目录到sd卡
```
msh />cd sd
```

查看文件
```
msh /sd>ls
Directory /sd:
AlmVoice            <DIR>
zmaee               <DIR>
@Playlists          <DIR>
My Music            <DIR>
Photos              <DIR>
Videos              <DIR>
sdl_test.elf        1046388
men.bmp             2094054
w.bmp               12183750
1002.bmp            1907166
1001.bmp            2195030
qin.BMP             230454
200.bmp             2423206
1.bmp               2512854
hello.elf           216012
```

查看sdl用法
```
msh /sd>sdl_test.elf -h
msh /sd>screen: lcd - 0x00202000, size 522240
screen: bpp 32, width - 480, height - 272

Usage: sdl_test.elf option
        option:
        -l      draw line
        -r      draw a rectangle
        -t      draw a rectangle with texture
        -p      draw a bmp picture with texture

```
画条线line
```
msh /sd>sdl_test.elf -l
msh /sd>screen: lcd - 0x00202000, size 522240
screen: bpp 32, width - 480, height - 272
```

来画个矩形吧
```
msh /sd>sdl_test.elf -r
msh /sd>screen: lcd - 0x00202000, size 522240
screen: bpp 32, width - 480, height - 272
```
![ART-piSmartR.jpg](https://oss-club.rt-thread.org/uploads/20220423/3410478a0877adcdbfc954a077df87f2.jpg.webp)

### 显示图片
```
msh /sd>sdl_test.elf -p men.bmp
msh /sd>screen: lcd - 0x00202000, size 522240
screen: bpp 32, width - 480, height - 272
```
![4.jpg](https://oss-club.rt-thread.org/uploads/20220424/a119fba49b6d46eb273d5f35783d1c2c.jpg.webp)

### 后续
下回要体验什么功能，客官您请说.

有以下功能示例：

![egg.png](https://oss-club.rt-thread.org/uploads/20220423/35cebca93dbfb0981e5335883a66e994.png)