RT-Thread-【2024-RSOC】Clion + env + open-ocd 环境搭建（Day1）RT-Thread问答社区

【2024-RSOC】Clion + env + open-ocd 环境搭建（Day1）

发布于 2024-07-24 03:22:48 浏览：160 订阅该版

**Below are the detailed steps above how to use the building tool to export Cmake project and how to config Clion**

1- Install the Env building tool

![screenshot_tools-chain.jpg](https://oss-club.rt-thread.org/uploads/20240724/4ee41e9d06925f8ba003356e6fc72b10.jpg.webp)

2- Open and register the env to system

![screenshot_env.png](https://oss-club.rt-thread.org/uploads/20240724/fd87c0f2959cf19c946e57a33166ad67.png)

3- Config success

![screenshot_success.jpg](https://oss-club.rt-thread.org/uploads/20240724/7b3c6bf8c04919cc4d67650d28f023ac.jpg)

4- Enter the bsp folder

![screenshot_bsp.jpg](https://oss-club.rt-thread.org/uploads/20240724/030422df132eaf26614e2afeef0dba9e.jpg.webp)

5- Right click mouse and select ConeMu here

6- Run the command `scons --dist` to generate project

7- `cd ./dist/project` and run the command `scons --target=cmake` To generate Cmakelist.

8- Open Clion and open the project

9- Config tool-chain

![screenshot_tools-chain.jpg](https://oss-club.rt-thread.org/uploads/20240724/4ee41e9d06925f8ba003356e6fc72b10.jpg.webp)

10- Config Open-OCD

![screenshot_open-ocd.jpg](https://oss-club.rt-thread.org/uploads/20240724/f278ffd0d3ffbb4bb73867fe33d40884.jpg.webp)

11- As the burning tool is dap-link so the config content is

```
adapter driver cmsis-dap

transport select swd

source [find target/stm32f4x.cfg]

adapter speed 10000

```

12- Compile and burning

![screenshot_OPENOCD.jpg](https://oss-club.rt-thread.org/uploads/20240724/8747c601e8cb97a825d6d5f9ecbef447.jpg.webp)

回到
底部

【2024-RSOC】Clion + env + open-ocd 环境搭建（Day1）