RT-Thread-复制别人的rt studio项目出现一堆报错且RT-Thread Settings点击没反应RT-Thread问答社区

复制别人的rt studio项目出现一堆报错且RT-Thread Settings点击没反应

发布于 2024-06-22 14:35:03 浏览：375 订阅该版

从同事那里发给我的一个文件夹，里面是一个STM32F407VGT6的MCU项目，本人实在是看不懂这个项目的导入方式，我如果在RT STDUIO中，选择导入MDK项目，可以正常使用；选择导入RT STUDIO项目，也能搜索到相关的文件，但是一编译就会有一堆的报错，报错第一个也是最多的是：

```
../rt-thread/components/drivers/i2c/i2c-bit-ops.c:28:8: error: dereferencing pointer to incomplete type 'struct rt_i2c_bit_ops'
```

并且假设我使用MDK项目导入，实际上在这个项目的根目录的board文件夹里，有CubeMX_Config文件夹，里面的CubeMX_Config.ioc双击打开，也能正确的读取到当前所有芯片的引脚配置时钟配置等，我在这里做的修改也能直接应用到我的项目上，而且文件夹的根目录也有KConfig文件，我可以用ConEMU Here功能，menuconfig能读取到所有的设置参数比如我开了USART3作为串口日志输出，看门狗启用了等等，但是当我修改了某些设置，比如只是把USART1打开了然后就会报错，都没有执行scons --target=mdk5，回到RT-Thread STUDIO中编译，会报错：

```
applications\main.c(102): error:  #20: identifier "CAN250kBaud" is undefined
  static u32_t can_speed = CAN250kBaud;
applications\main.c(401): error:  #20: identifier "RT_DEVICE_CTRL_WDT_KEEPALIVE" is undefined
      rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_KEEPALIVE, NULL);
applications\main.c(408): error:  #20: identifier "RT_DEVICE_CTRL_WDT_KEEPALIVE" is undefined
      rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_KEEPALIVE, NULL);
applications\main.c(427): error:  #20: identifier "RT_DEVICE_CTRL_WDT_SET_TIMEOUT" is undefined
      ret = rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_SET_TIMEOUT, &timeout);
applications\main.c(435): error:  #20: identifier "RT_DEVICE_CTRL_WDT_START" is undefined
      ret = rt_device_control(wdg_dev, RT_DEVICE_CTRL_WDT_START, RT_NULL);
applications\main.c(502): warning:  #177-D: variable "srv_state" was declared but never referenced
      int  srv_state = 0;
applications\main.c(503): warning:  #177-D: variable "len" was declared but never referenced
      int len = 0;
applications\main.c(504): warning:  #177-D: variable "deviceId" was declared but never referenced
[15248] Failed to execute script main
Traceback (most recent call last):
  File "src\main.py", line 1007, in <module>
  File "src\main.py", line 668, in build
  File "src\main.py", line 353, in run_uv4_exe
UnicodeDecodeError: 'gbk' codec can't decode byte 0xfd in position 1665: illegal multibyte sequence
d:/rt-threadstudio/platform/env_released/env/tools/buildtools/2.12-20190422-1053/bin/sh: studio-mdk-bridge.exe: not found
make: [../makefile.targets:9: mdk_all] Error 127 (ignored)
```

目前没有任何思路了，求助哪位能提供点排查问题的思路，谢谢。

![1.png](https://oss-club.rt-thread.org/uploads/20240622/698e38439c864d0bc050c88044fe869d.png.webp)

![2.png](https://oss-club.rt-thread.org/uploads/20240622/985f55fb4739dbee40ee39670710b300.png)

![3.png](https://oss-club.rt-thread.org/uploads/20240622/ea55209c8f29cc341c2d71727fdc37d8.png)