rt studio 下载完后程序不运行

发布于 2020-11-27 13:08:06

dd.png

导入一个工程后,下载完,程序不运行,咋办呢?板子用的时nucleo_l476rg
也无法进入调试模式:

Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 66]
Download in Progress:

File download complete
Time elapsed during download operation: 00:00:04.454
------ Switching context -----
Target connection mode: Default
Hardware watchpoint supported by the target
COM frequency = 4000 kHz
ST-LINK Firmware version : V2J27M15
Device ID: 0x415
PC: 0xb9337822
ST-LINK detects target voltage = 3.25 V
ST-LINK device status: HALT_MODE
ST-LINK device initialization OK
Enter STM32_AppReset() function
NVIC_DFSR_REG = 0x00000008
NVIC_CFGFSR_REG = 0x00000000
TraceCaptureStart and SWV event set to APP_TRUE
ST-LINK device status: LOCKUP
Enter STM32_AppReset() function
NVIC_DFSR_REG = 0x00000008
NVIC_CFGFSR_REG = 0x00000000
Error! Failed to read target status
Debugger connection lost.
Shutting down...

添加 启动文件后 ,编译报错:

HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:1: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:2: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:3: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:4: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:5: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:6: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:7: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:8: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:9: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:10: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:11: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:12: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:13: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:14: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:15: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:16: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:16: Error: bad instruction `copyright (c)2017 STMicroelectronics.'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:17: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:18: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:19: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:20: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:20: Error: bad instruction `you may not use this file except in compliance with the'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:21: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:22: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:23: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:24: Error: junk at end of line, first unrecognized character is `*'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:26: Error: bad instruction `amount of memory(in bytes)allocated for Stack'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:27: Error: bad instruction `tailor this value to your application needs'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:28: Error: junk at end of line, first unrecognized character is `<'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:29: Error: junk at end of line, first unrecognized character is `<'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:30: Error: junk at end of line, first unrecognized character is `<'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:32: Error: bad instruction `stack_size EQU 0x400'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:34: Error: bad instruction `area STACK,NOINIT,READWRITE,ALIGN=3'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:35: Error: bad instruction `stack_mem SPACE Stack_Size'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:36: Error: bad instruction `__initial_sp'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:39: Error: junk at end of line, first unrecognized character is `<'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:40: Error: junk at end of line, first unrecognized character is `<'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:41: Error: junk at end of line, first unrecognized character is `<'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:43: Error: bad instruction `heap_size EQU 0x200'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:45: Error: bad instruction `area HEAP,NOINIT,READWRITE,ALIGN=3'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:46: Error: bad instruction `__heap_base'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:47: Error: bad instruction `heap_mem SPACE Heap_Size'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:48: Error: bad instruction `__heap_limit'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:50: Error: bad instruction `preserve8'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:51: Error: bad instruction `thumb'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:54: Error: bad instruction `vector Table Mapped to Address 0 at Reset'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:55: Error: bad instruction `area RESET,DATA,READONLY'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:56: Error: bad instruction `export __Vectors'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:57: Error: bad instruction `export __Vectors_End'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:58: Error: bad instruction `export __Vectors_Size'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:60: Error: bad instruction `__vectors DCD __initial_sp'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:60: Error: bad instruction `top of Stack'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:61: Error: bad instruction `dcd Reset_Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:61: Error: bad instruction `reset Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:62: Error: bad instruction `dcd NMI_Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:62: Error: bad instruction `nmi Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:63: Error: bad instruction `dcd HardFault_Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:63: Error: bad instruction `hard Fault Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:64: Error: bad instruction `dcd MemManage_Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:64: Error: bad instruction `mpu Fault Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:65: Error: bad instruction `dcd BusFault_Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:65: Error: bad instruction `bus Fault Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:66: Error: bad instruction `dcd UsageFault_Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:66: Error: bad instruction `usage Fault Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:67: Error: bad instruction `dcd 0'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:67: Error: bad instruction `reserved'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:68: Error: bad instruction `dcd 0'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:68: Error: bad instruction `reserved'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:69: Error: bad instruction `dcd 0'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:69: Error: bad instruction `reserved'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:70: Error: bad instruction `dcd 0'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:70: Error: bad instruction `reserved'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:71: Error: bad instruction `dcd SVC_Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:71: Error: bad instruction `svcall Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:72: Error: bad instruction `dcd DebugMon_Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:72: Error: bad instruction `debug Monitor Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:73: Error: bad instruction `dcd 0'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:73: Error: bad instruction `reserved'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:74: Error: bad instruction `dcd PendSV_Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:74: Error: bad instruction `pendsv Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:75: Error: bad instruction `dcd SysTick_Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:75: Error: bad instruction `systick Handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:77: Error: bad instruction `external Interrupts'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:78: Error: bad instruction `dcd WWDG_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:78: Error: bad instruction `window WatchDog'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:79: Error: bad instruction `dcd PVD_PVM_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:79: Error: bad instruction `pvd/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:80: Error: bad instruction `dcd TAMP_STAMP_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:80: Error: bad instruction `tamper and TimeStamps through the EXTI line'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:81: Error: bad instruction `dcd RTC_WKUP_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:81: Error: bad instruction `rtc Wakeup through the EXTI line'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:82: Error: bad instruction `dcd FLASH_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:82: Error: bad instruction `flash'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:83: Error: bad instruction `dcd RCC_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:83: Error: bad instruction `rcc'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:84: Error: bad instruction `dcd EXTI0_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:84: Error: bad instruction `exti Line0'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:85: Error: bad instruction `dcd EXTI1_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:85: Error: bad instruction `exti Line1'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:86: Error: bad instruction `dcd EXTI2_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:86: Error: bad instruction `exti Line2'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:87: Error: bad instruction `dcd EXTI3_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:87: Error: bad instruction `exti Line3'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:88: Error: bad instruction `dcd EXTI4_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:88: Error: bad instruction `exti Line4'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:89: Error: bad instruction `dcd DMA1_Channel1_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:89: Error: bad instruction `dma1 Channel 1'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:90: Error: bad instruction `dcd DMA1_Channel2_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:90: Error: bad instruction `dma1 Channel 2'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:91: Error: bad instruction `dcd DMA1_Channel3_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:91: Error: bad instruction `dma1 Channel 3'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:92: Error: bad instruction `dcd DMA1_Channel4_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:92: Error: bad instruction `dma1 Channel 4'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:93: Error: bad instruction `dcd DMA1_Channel5_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:93: Error: bad instruction `dma1 Channel 5'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:94: Error: bad instruction `dcd DMA1_Channel6_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:94: Error: bad instruction `dma1 Channel 6'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:95: Error: bad instruction `dcd DMA1_Channel7_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:95: Error: bad instruction `dma1 Channel 7'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:96: Error: bad instruction `dcd ADC1_2_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:96: Error: bad instruction `adc1, ADC2'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:97: Error: bad instruction `dcd CAN1_TX_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:97: Error: bad instruction `can1 TX'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:98: Error: bad instruction `dcd CAN1_RX0_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:98: Error: bad instruction `can1 RX0'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:99: Error: bad instruction `dcd CAN1_RX1_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:99: Error: bad instruction `can1 RX1'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:100: Error: bad instruction `dcd CAN1_SCE_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:100: Error: bad instruction `can1 SCE'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:101: Error: bad instruction `dcd EXTI9_5_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:101: Error: bad instruction `external Line[9:5]s'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:102: Error: bad instruction `dcd TIM1_BRK_TIM15_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:102: Error: bad instruction `tim1 Break and TIM15'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:103: Error: bad instruction `dcd TIM1_UP_TIM16_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:103: Error: bad instruction `tim1 Update and TIM16'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:104: Error: bad instruction `dcd TIM1_TRG_COM_TIM17_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:104: Error: bad instruction `tim1 Trigger and Commutation and TIM17'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:105: Error: bad instruction `dcd TIM1_CC_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:105: Error: bad instruction `tim1 Capture Compare'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:106: Error: bad instruction `dcd TIM2_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:106: Error: bad instruction `tim2'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:107: Error: bad instruction `dcd TIM3_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:107: Error: bad instruction `tim3'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:108: Error: bad instruction `dcd TIM4_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:108: Error: bad instruction `tim4'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:109: Error: bad instruction `dcd I2C1_EV_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:109: Error: bad instruction `i2c1 Event'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:110: Error: bad instruction `dcd I2C1_ER_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:110: Error: bad instruction `i2c1 Error'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:111: Error: bad instruction `dcd I2C2_EV_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:111: Error: bad instruction `i2c2 Event'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:112: Error: bad instruction `dcd I2C2_ER_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:112: Error: bad instruction `i2c2 Error'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:113: Error: bad instruction `dcd SPI1_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:113: Error: bad instruction `spi1'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:114: Error: bad instruction `dcd SPI2_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:114: Error: bad instruction `spi2'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:115: Error: bad instruction `dcd USART1_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:115: Error: bad instruction `usart1'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:116: Error: bad instruction `dcd USART2_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:116: Error: bad instruction `usart2'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:117: Error: bad instruction `dcd USART3_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:117: Error: bad instruction `usart3'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:118: Error: bad instruction `dcd EXTI15_10_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:118: Error: bad instruction `external Line[15:10]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:119: Error: bad instruction `dcd RTC_Alarm_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:119: Error: bad instruction `rtc Alarm(A and B)through EXTI Line'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:120: Error: bad instruction `dcd DFSDM1_FLT3_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:120: Error: bad instruction `dfsdm1 Filter 3 global Interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:121: Error: bad instruction `dcd TIM8_BRK_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:121: Error: bad instruction `tim8 Break Interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:122: Error: bad instruction `dcd TIM8_UP_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:122: Error: bad instruction `tim8 Update Interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:123: Error: bad instruction `dcd TIM8_TRG_COM_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:123: Error: bad instruction `tim8 Trigger and Commutation Interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:124: Error: bad instruction `dcd TIM8_CC_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:124: Error: bad instruction `tim8 Capture Compare Interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:125: Error: bad instruction `dcd ADC3_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:125: Error: bad instruction `adc3 global Interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:126: Error: bad instruction `dcd FMC_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:126: Error: bad instruction `fmc'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:127: Error: bad instruction `dcd SDMMC1_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:127: Error: bad instruction `sdmmc1'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:128: Error: bad instruction `dcd TIM5_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:128: Error: bad instruction `tim5'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:129: Error: bad instruction `dcd SPI3_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:129: Error: bad instruction `spi3'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:130: Error: bad instruction `dcd UART4_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:130: Error: bad instruction `uart4'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:131: Error: bad instruction `dcd UART5_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:131: Error: bad instruction `uart5'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:132: Error: bad instruction `dcd TIM6_DAC_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:132: Error: bad instruction `tim6 and DAC1&2 underrun errors'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:133: Error: bad instruction `dcd TIM7_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:133: Error: bad instruction `tim7'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:134: Error: bad instruction `dcd DMA2_Channel1_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:134: Error: bad instruction `dma2 Channel 1'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:135: Error: bad instruction `dcd DMA2_Channel2_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:135: Error: bad instruction `dma2 Channel 2'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:136: Error: bad instruction `dcd DMA2_Channel3_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:136: Error: bad instruction `dma2 Channel 3'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:137: Error: bad instruction `dcd DMA2_Channel4_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:137: Error: bad instruction `dma2 Channel 4'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:138: Error: bad instruction `dcd DMA2_Channel5_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:138: Error: bad instruction `dma2 Channel 5'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:139: Error: bad instruction `dcd DFSDM1_FLT0_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:139: Error: bad instruction `dfsdm1 Filter 0 global Interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:140: Error: bad instruction `dcd DFSDM1_FLT1_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:140: Error: bad instruction `dfsdm1 Filter 1 global Interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:141: Error: bad instruction `dcd DFSDM1_FLT2_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:141: Error: bad instruction `dfsdm1 Filter 2 global Interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:142: Error: bad instruction `dcd COMP_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:142: Error: bad instruction `comp Interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:143: Error: bad instruction `dcd LPTIM1_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:143: Error: bad instruction `lp TIM1 interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:144: Error: bad instruction `dcd LPTIM2_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:144: Error: bad instruction `lp TIM2 interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:145: Error: bad instruction `dcd OTG_FS_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:145: Error: bad instruction `usb OTG FS'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:146: Error: bad instruction `dcd DMA2_Channel6_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:146: Error: bad instruction `dma2 Channel 6'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:147: Error: bad instruction `dcd DMA2_Channel7_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:147: Error: bad instruction `dma2 Channel 7'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:148: Error: bad instruction `dcd LPUART1_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:148: Error: bad instruction `lp UART1 interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:149: Error: bad instruction `dcd QUADSPI_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:149: Error: bad instruction `quad SPI global interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:150: Error: bad instruction `dcd I2C3_EV_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:150: Error: bad instruction `i2c3 event'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:151: Error: bad instruction `dcd I2C3_ER_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:151: Error: bad instruction `i2c3 error'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:152: Error: bad instruction `dcd SAI1_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:152: Error: bad instruction `serial Audio Interface 1 global interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:153: Error: bad instruction `dcd SAI2_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:153: Error: bad instruction `serial Audio Interface 2 global interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:154: Error: bad instruction `dcd SWPMI1_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:154: Error: bad instruction `serial Wire Interface 1 global interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:155: Error: bad instruction `dcd TSC_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:155: Error: bad instruction `touch Sense Controller global interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:156: Error: bad instruction `dcd LCD_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:156: Error: bad instruction `lcd global interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:157: Error: bad instruction `dcd 0'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:157: Error: bad instruction `reserved'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:158: Error: bad instruction `dcd RNG_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:158: Error: bad instruction `rng global interrupt'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:159: Error: bad instruction `dcd FPU_IRQHandler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:159: Error: bad instruction `fpu'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:161: Error: bad instruction `__vectors_end'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:163: Error: bad instruction `__vectors_size EQU __Vectors_End-__Vectors'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:165: Error: bad instruction `area |.text|,CODE,READONLY'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:167: Error: bad instruction `reset handler'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:168: Error: bad instruction `reset_handler PROC'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:169: Error: bad instruction `export Reset_Handler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:170: Error: bad instruction `import SystemInit'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:171: Error: bad instruction `import __main'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:177: Error: bad instruction `endp'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:179: Error: bad instruction `dummy Exception Handlers(infinite loops which can be modified)'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:181: Error: bad instruction `nmi_handler PROC'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:182: Error: bad instruction `export NMI_Handler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:184: Error: bad instruction `endp'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:185: Error: bad instruction `hardfault_handler PROC'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:187: Error: bad instruction `export HardFault_Handler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:189: Error: bad instruction `endp'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:190: Error: bad instruction `memmanage_handler PROC'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:192: Error: bad instruction `export MemManage_Handler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:194: Error: bad instruction `endp'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:195: Error: bad instruction `busfault_handler PROC'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:197: Error: bad instruction `export BusFault_Handler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:199: Error: bad instruction `endp'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:200: Error: bad instruction `usagefault_handler PROC'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:202: Error: bad instruction `export UsageFault_Handler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:204: Error: bad instruction `endp'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:205: Error: bad instruction `svc_handler PROC'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:206: Error: bad instruction `export SVC_Handler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:208: Error: bad instruction `endp'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:209: Error: bad instruction `debugmon_handler PROC'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:211: Error: bad instruction `export DebugMon_Handler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:213: Error: bad instruction `endp'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:214: Error: bad instruction `pendsv_handler PROC'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:215: Error: bad instruction `export PendSV_Handler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:217: Error: bad instruction `endp'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:218: Error: bad instruction `systick_handler PROC'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:219: Error: bad instruction `export SysTick_Handler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:221: Error: bad instruction `endp'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:223: Error: bad instruction `default_handler PROC'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:225: Error: bad instruction `export WWDG_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:226: Error: bad instruction `export PVD_PVM_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:227: Error: bad instruction `export TAMP_STAMP_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:228: Error: bad instruction `export RTC_WKUP_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:229: Error: bad instruction `export FLASH_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:230: Error: bad instruction `export RCC_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:231: Error: bad instruction `export EXTI0_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:232: Error: bad instruction `export EXTI1_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:233: Error: bad instruction `export EXTI2_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:234: Error: bad instruction `export EXTI3_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:235: Error: bad instruction `export EXTI4_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:236: Error: bad instruction `export DMA1_Channel1_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:237: Error: bad instruction `export DMA1_Channel2_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:238: Error: bad instruction `export DMA1_Channel3_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:239: Error: bad instruction `export DMA1_Channel4_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:240: Error: bad instruction `export DMA1_Channel5_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:241: Error: bad instruction `export DMA1_Channel6_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:242: Error: bad instruction `export DMA1_Channel7_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:243: Error: bad instruction `export ADC1_2_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:244: Error: bad instruction `export CAN1_TX_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:245: Error: bad instruction `export CAN1_RX0_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:246: Error: bad instruction `export CAN1_RX1_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:247: Error: bad instruction `export CAN1_SCE_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:248: Error: bad instruction `export EXTI9_5_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:249: Error: bad instruction `export TIM1_BRK_TIM15_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:250: Error: bad instruction `export TIM1_UP_TIM16_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:251: Error: bad instruction `export TIM1_TRG_COM_TIM17_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:252: Error: bad instruction `export TIM1_CC_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:253: Error: bad instruction `export TIM2_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:254: Error: bad instruction `export TIM3_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:255: Error: bad instruction `export TIM4_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:256: Error: bad instruction `export I2C1_EV_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:257: Error: bad instruction `export I2C1_ER_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:258: Error: bad instruction `export I2C2_EV_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:259: Error: bad instruction `export I2C2_ER_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:260: Error: bad instruction `export SPI1_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:261: Error: bad instruction `export SPI2_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:262: Error: bad instruction `export USART1_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:263: Error: bad instruction `export USART2_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:264: Error: bad instruction `export USART3_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:265: Error: bad instruction `export EXTI15_10_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:266: Error: bad instruction `export RTC_Alarm_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:267: Error: bad instruction `export DFSDM1_FLT3_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:268: Error: bad instruction `export TIM8_BRK_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:269: Error: bad instruction `export TIM8_UP_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:270: Error: bad instruction `export TIM8_TRG_COM_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:271: Error: bad instruction `export TIM8_CC_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:272: Error: bad instruction `export ADC3_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:273: Error: bad instruction `export FMC_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:274: Error: bad instruction `export SDMMC1_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:275: Error: bad instruction `export TIM5_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:276: Error: bad instruction `export SPI3_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:277: Error: bad instruction `export UART4_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:278: Error: bad instruction `export UART5_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:279: Error: bad instruction `export TIM6_DAC_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:280: Error: bad instruction `export TIM7_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:281: Error: bad instruction `export DMA2_Channel1_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:282: Error: bad instruction `export DMA2_Channel2_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:283: Error: bad instruction `export DMA2_Channel3_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:284: Error: bad instruction `export DMA2_Channel4_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:285: Error: bad instruction `export DMA2_Channel5_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:286: Error: bad instruction `export DFSDM1_FLT0_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:287: Error: bad instruction `export DFSDM1_FLT1_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:288: Error: bad instruction `export DFSDM1_FLT2_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:289: Error: bad instruction `export COMP_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:290: Error: bad instruction `export LPTIM1_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:291: Error: bad instruction `export LPTIM2_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:292: Error: bad instruction `export OTG_FS_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:293: Error: bad instruction `export DMA2_Channel6_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:294: Error: bad instruction `export DMA2_Channel7_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:295: Error: bad instruction `export LPUART1_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/STM32L4xx_HAL/CMSIS/Device/ST/STM32L4xx/Source/Templates/arm/startup_stm32l476xx.s:296: Error: bad instruction `export QUADSPI_IRQHandler [WEAK]'
I:/custom/stm32l476-st-nucleo/libraries/ST

查看更多

关注者
0
被浏览
255
1 个回答
chenyaxing
chenyaxing 2020-11-29

试下在摁住reset 键的状态下,使用stlink utility 擦掉整个芯片

撰写答案

请登录后再发布答案,点击登录

发布
问题

分享
好友

手机
浏览

扫码手机浏览