studio STlink 下载失败

发布于 2021-07-25 21:54:26 浏览：1541 订阅该版

```
start download flash :2021-07-25 21:46:43
C:\RT-ThreadStudio\repo\Extract\Debugger_Support_Packages\STMicroelectronics\ST-LINK_Debugger\1.6.0\tools\bin>C:\RT-ThreadStudio\repo\Extract\Debugger_Support_Packages\STMicroelectronics\ST-LINK_Debugger\1.6.0\tools\bin\STM32_Programmer_CLI.exe -c port=SWD mode=NORMAL -e all -d "C:\RT-ThreadStudio\workspace\test\Debug\rtthread.elf" -hardRst -s 
      -------------------------------------------------------------------
                       STM32CubeProgrammer v2.7.0-RC1                  
      -------------------------------------------------------------------
ST-LINK SN  : 50FF6E065078525356
ST-LINK FW  : V2J37S7
Board       : --
Voltage     : 3.23V
SWD freq    : 4000 KHz
Connect mode: Normal
Reset mode  : Software reset
Device ID   : 0x414
Revision ID : Rev X
Device name : STM32F101/F103 High-density
Flash size  : 512 KBytes
Device type : MCU
Device CPU  : Cortex-M3
Mass erase ... 
Mass erase successfully achieved
Memory Programming ...
Opening and parsing file: rtthread.elf
  File          : rtthread.elf
  Size          : 51604 Bytes
  Address       : 0x08000000 
Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 25]
Download in Progress:
Progress: 100%
File download complete
Time elapsed during download operation: 00:00:02.628
Error: Unable to reset MCU!
RUNNING Program ... 
  Address:      : 0x8000000
Warning: The core is locked up
The core is locked up, you can choose one of the following methods: 1.Open the debug configuration and select the full chip erase 2.Use ST-Link Utility to erase the entire chip, and then burn the file
Start operation achieved successfully
completed, elapse time :3008ms.
```