能否修改程序运行时的首地址？

发布于 2022-11-16 15:16:00 浏览：866 订阅该版

[tocm]

能否修改程序运行的首地址，目前程序运行的起始地址为0x80000000
修改过FLASH_BASE,VECT_TAB_OFFSET,link.sct,link.icf,link.lds,但没有同时修改过。
希望能修改
```
**RUNNING Program ...
  Address:      : 0x8000000**
```
## 现象：
```
ST-LINK SN  : 004400223900000B4E4D5451
ST-LINK FW  : V2J37M26
Board       : --
Voltage     : 3.24V
SWD freq    : 4000 KHz
Connect mode: Normal
Reset mode  : Software reset
Device ID   : 0x415
Revision ID : Rev 4
Device name : STM32L4x1/STM32L475xx/STM32L476xx/STM32L486xx
Flash size  : 512 KBytes
Device type : MCU
Device CPU  : Cortex-M4
Memory Programming ...
Opening and parsing file: rtthread.elf
  File          : rtthread.elf
  Size          : 517128 Bytes
  Address       : 0x08000000
Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 252]
Download in Progress:
Progress: 18%
Progress: 36%
Progress: 54%
Progress: 73%
Progress: 91%
Progress: 100%
File download complete
Time elapsed during download operation: 00:00:15.028
RUNNING Program ...
  Address:      : 0x8000000
Application is running
Start operation achieved successfully
```