Wiznet W5500 ping不通，创建socket失败！

发布于 2019-05-11 13:12:48 浏览：3992 订阅该版

用的bsp\stm32\stm32f103的项目，电脑ping板卡是可以ping通的，板卡ping路由都不行，但是使用开发板的裸板程序是可以正常通讯的，也可以建立socket。
 反复排查，引脚配置也没问题，时钟的问题？
![QQ截图20190511125933.png](/uploads/201905/11/130105clihjctjjilavhhj.png)
调试跟踪发现socket_state = getSn_SR(socket);返回0x22
![QQ截图20190511130959.png](/uploads/201905/11/131037ejuexa3m00hgeyh3.png)
大神分析下一般会是什么原因！
\ | /
- RT -     Thread Operating System
 / | \     4.0.1 build May 11 2019
 2006 - 2019 Copyright by rt-thread team
[I/sal.skt] Socket Abstraction Layer initialize success.
[I/wiz] RT-Thread WIZnet package (V2.0.0) initialize success.
msh />ifconfig
network interface device: W5500 (Default)
MTU: 1472
MAC: 00 e0 81 dc 53 1a 
FLAGS: UP LINK_UP INTERNET_DOWN DHCP_ENABLE
ip address: 192.168.1.126
gw address: 192.168.1.1
net mask  : 255.255.255.0
dns server #0: 192.168.1.1
dns server #1: 0.0.0.0
msh />ping 192.168.1.1 
wiz_ping: create ping socket(536874736) failed.
ping: unknown host 192.168.1.1
wiz_ping: create ping socket(536874736) failed.
ping: unknown host 192.168.1.1
wiz_ping: create ping socket(536874736) failed.
ping: unknown host 192.168.1.1
wiz_ping: create ping socket(536874736) failed.
ping: unknown host 192.168.1.1
msh />tcpclient -h 192.168.1.102 -p 5000
[E/TCP] Create socket error