发现一个新问题，重启无法解决，需断电才可以重启系统.....

发布于 2019-10-08 19:25:40 浏览：1399 订阅该版

* 本帖最后由 Tonny 于 2019-10-8 19:27 编辑 *

最近刚完成了OTA串口的版本升降版本及恢复固件，现在当系统运行进入中断后，按复位键，也不能正常进入系统，不知道怎么解决，看日志，是fal的问题，但假如有问题，为什么断电后能正常进入系统，系统进入异常后通过引脚重启却不可再进入系统，有点不明白~
下面是正常进入系统的日志：
```[SFUD]Find a Winbond flash chip. Size is 8388608 bytes.
[SFUD]spi flash device is initialize success.

\ | /
- RT -     Thread Operating System
 / | \     4.0.2 build Sep 27 2019
 2006 - 2019 Copyright by rt-thread team
[1] I/sal.skt main: Socket Abstraction Layer initialize success.
[9] I/at.clnt main: AT client(V1.3.0) on device uart5 initialize success.
[17] D/at.dev main: esp8266 device(esp0) initialize start.
[30] I/at.dev at_clnt: esp8266 device(esp0) WIFI is disconnect.
[1047] D/at.dev main: AT version:1.2.0.0(Jul  1 2016 20:04:45)
[1053] D/at.dev main: SDK version:1.5.4.1(39cb9a32)
[1058] D/at.dev main: Ai-Thinker Technology Co., Ltd.
[1064] D/at.dev main: Integrated AiCloud 2.0 v0.0.0.6
[1069] D/at.dev main: Build:1.5.4.1 May 16 2017 17:57:15
[3229] I/at.dev at_clnt: esp8266 device(esp0) WIFI is connected.
[6084] I/at.dev main: esp8266 device(esp0) network initialize successfully.
[6093] D/at.dev main: the network interface device(esp0) set up status
[6100] I/NO_TAG main: System Start.
[6104] I/NO_TAG main: 
[6108] I/NO_TAG main: The version is v1.0
[6113] I/NO_TAG main: 
[SFUD] Find a Winbond flash chip. Size is 8388608 bytes.
[SFUD] W25Q64 flash device is initialize success.
[D/FAL] (fal_flash_init:61) Flash device |             onchip_flash | addr: 0x08000000 | len: 0x00080000 | blk_size: 0x00000800 |initialized finish.
[D/FAL] (fal_flash_init:61) Flash device |                   W25Q64 | addr: 0x00000000 | len: 0x00800000 | blk_size: 0x00001000 |initialized finish.
[I/FAL] ==================== FAL partition table ====================
[I/FAL] | name       | flash_dev    |   offset   |    length  |
[I/FAL] -------------------------------------------------------------
[I/FAL] | bootloader | onchip_flash | 0x00000000 | 0x00010000 |
[I/FAL] | app        | onchip_flash | 0x00010000 | 0x00040000 |
[I/FAL] | Storage    | onchip_flash | 0x00050000 | 0x00030000 |
[I/FAL] | FileSystem | W25Q64       | 0x00000000 | 0x00400000 |
[I/FAL] | Test       | W25Q64       | 0x00400000 | 0x00200000 |
[I/FAL] | ef         | W25Q64       | 0x00600000 | 0x00100000 |
[I/FAL] | download   | W25Q64       | 0x00700000 | 0x00080000 |
[I/FAL] | factory    | W25Q64       | 0x00780000 | 0x00080000 |
[I/FAL] =============================================================
[I/FAL] RT-Thread Flash Abstraction Layer (V0.4.0) initialize success.
[6255] I/NO_TAG main: Find 8 partitions.
[I/FAL] The FAL block device (Storage) created successfully
[I/FAL] The FAL block device (FileSystem) created successfully
[I/FAL] The FAL block device (Test) created successfully
[I/FAL] The FAL block device (ef) created successfully
[I/FAL] The FAL block device (download) created successfully
[I/FAL] The FAL block device (factory) created successfully
msh />[6780] I/NO_TAG main: System Ready.
[6786] D/onenet.mqtt mqtt0: Enter mqtt_connect_callback!
[6791] D/mqtt mqtt0: ipv4 address port: 6002
[6796] D/mqtt mqtt0: HOST = '183.230.40.39'
[6805] I/onenet.mqtt onenet: RT-Thread OneNET package(V1.0.0) initialize success.
[6815] I/sensor Ds18b20: rt_sensor init success
[6925] I/mqtt mqtt0: MQTT server connect success.
[6931] D/onenet.mqtt mqtt0: Enter mqtt_online_callback!
[7104] E/at.clnt sys_work: execute command (AT+CIPDNS_CUR?) failed!
[7112] W/at.dev sys_work: please check and update device(esp0) firmware to support the "AT+CIPDNS_CUR?" command.

msh />```

下面是系统异常后，引脚重启后的日志：
```[SFUD]Find a Winbond flash chip. Size is 8388608 bytes.
[SFUD]spi flash device is initialize success.

\ | /
- RT -     Thread Operating System
 / | \     4.0.2 build Sep 27 2019
 2006 - 2019 Copyright by rt-thread team
[1] I/sal.skt main: Socket Abstraction Layer initialize success.
[9] I/at.clnt main: AT client(V1.3.0) on device uart5 initialize success.
[17] D/at.dev main: esp8266 device(esp0) initialize start.
[5124] E/at.clnt main: wait AT client(uart5) connect timeout(5000 tick).
[5132] D/at.dev main: the network interface device(esp0) set up status
[5139] I/NO_TAG main: System Start.
[5143] I/NO_TAG main: 
[5147] I/NO_TAG main: The version is v1.0
[5152] I/NO_TAG main: 
[SFUD] Warning: Read SFDP parameter header information failed. The W25Q64 is not support JEDEC SFDP.
[SFUD] Warning: This flash device is not found or not support.
[SFUD] Error: W25Q64 flash device is initialize fail.
ERROR: SPI flash probe failed by SPI device spi10.
[5182] E/NO_TAG main: W25Q64 Initialized Failed.

msh /> ```
没试过看门狗进行系统复位是什么结果，打算明天试试，看看情况。