挂载文件系统 423

文件系统挂载断言机制，只能在系统APP里初始化并要延时500ms才能挂载系统

发布于 2020-07-22 08:38:17 浏览：1044

```c
int rt_hw_sdio_init(void)
{
    struct stm32_sdio_des sdio_des;
    SD_HandleTypeDef hsd;
    hsd.Instance = SDCARD_INSTANCE;
    {
        rt_uint32_t tmpreg = 0x00U;
#if defined(SOC_SERIES_STM32F1)
        /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
        SET_BIT(RCC->AHBENR, sdio_config.dma_rx.dma_rcc);
        tmpreg = READ_BIT(RCC->AHBENR, sdio_config.dma_rx.dma_rcc);
#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4)
        SET_BIT(RCC->AHB1ENR, sdio_config.dma_rx.dma_rcc);
        /* Delay after an RCC peripheral clock enabling */
        tmpreg = READ_BIT(RCC->AHB1ENR, sdio_config.dma_rx.dma_rcc);
#endif
        UNUSED(tmpreg); /* To avoid compiler warnings */
    }
    HAL_NVIC_SetPriority(SDIO_IRQn, 2, 0);
    HAL_NVIC_EnableIRQ(SDIO_IRQn);
    HAL_SD_MspInit(&hsd);

sdio_des.clk_get = stm32_sdio_clock_get;
    sdio_des.hw_sdio = (struct stm32_sdio *)SDCARD_INSTANCE;
    sdio_des.rxconfig = DMA_RxConfig;
    sdio_des.txconfig = DMA_TxConfig;

host = sdio_host_create(&sdio_des);
    if (host == RT_NULL)
    {
        LOG_E("host create fail");
        return -1;
    }

return 0;
}
INIT_DEVICE_EXPORT(rt_hw_sdio_init);

static int dfs_file_init(void)
{
    if (0 == dfs_mount("sd0", "/", "elm", 0, 0))
    {
        rt_kprintf(" \n");
        rt_kprintf("SD card mount successful.\n");
        return 0;
    }
    else
    {
        rt_kprintf(" \n");
        rt_kprintf("SD card mount failed.\n");
        return -1;
    }
}

INIT_ENV_EXPORT(dfs_file_init);
```

这样的情况下，会出现 
(dev != RT_NULL) assertion failed at function:rt_device_control, line number:423