编译下载及运行正常，但是无法启动调试

发布于 2021-06-30 10:43:19 浏览：1097 订阅该版

[tocm]

编译正常，下载正常，工作正常，但是程序无法仿真，请各位帮忙看下是什么原因，谢谢。
(同样的硬件，使用keil能够在线仿真)

## 环境配置：
* Windows 10
* RTT Studio 2.10
* ST-link 4.5.0

---

```
STMicroelectronics ST-LINK GDB server. Version 5.8.0
Copyright (c) 2020, STMicroelectronics. All rights reserved.

Starting server with the following options:
        Persistent Mode            : Disabled
        LogFile Name               : debug.log
        Logging Level              : 31
        Listen Port Number         : 61235
        Status Refresh Delay       : 15s
        Verbose Mode               : Disabled
        SWD Debug                  : Enabled

Target connection mode: Default
Reading ROM table for AP 0 @0xe00fffd0
Hardware watchpoint supported by the target 
COM frequency = 4000 kHz
ST-LINK Firmware version : V2J37S7
Device ID: 0x414
PC: 0x800a138
ST-LINK device status: HALT_MODE
ST-LINK detects target voltage = 3.17 V
ST-LINK device status: HALT_MODE
ST-LINK device initialization OK
Waiting for debugger connection...
Waiting for connection on port 61235...
Accepted connection on port 61235...
Debugger connected
 ------ Switching to STM32CubeProgrammer ----- 
      -------------------------------------------------------------------
                       STM32CubeProgrammer v2.7.0-RC1                  
      -------------------------------------------------------------------

Error: C:\Users\客户\AppData\Local\Temp\STM32CubeProgrammer_a16844.log does not exist
ST-LINK SN  : 52FF6E066570555116301287
ST-LINK FW  : V2J37S7
Board       : --
Voltage     : 3.17V
SWD freq    : 4000 KHz
Connect mode: Under Reset
Reset mode  : Hardware reset
Device ID   : 0x414
Revision ID : Rev X
Device name : STM32F101/F103 High-density
Flash size  : 512 KBytes
Device type : MCU
Device CPU  : Cortex-M3

Memory Programming ...
Opening and parsing file: ST-LINK_GDB_server_a16844.srec
  File          : ST-LINK_GDB_server_a16844.srec
  Size          : 62008 Bytes
  Address       : 0x08000000

Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 30]
Download in Progress:

File download complete
Time elapsed during download operation: 00:00:03.132
Encountered Error when opening C:\RT-ThreadStudio\repo\Extract\Debugger_Support_Packages\STMicroelectronics\ST-LINK_Debugger\1.6.0\tools\bin\STM32_Programmer_CLI.exe
 ------ Switching context ----- 
Error in STM32CubeProgrammer
Debugger connection lost.
Shutting down...
```

3 个回答

123 认证专家 2021-06-30

这家伙很懒，什么也没写！

superdwh 2021-06-30

这家伙很懒，什么也没写！

已更新`ST LINK`的固件为最新版本，但是依然是同样的情况，无法仿真。。。。
---
```
STMicroelectronics ST-LINK GDB server. Version 5.8.0
Copyright (c) 2020, STMicroelectronics. All rights reserved.

Starting server with the following options:
        Persistent Mode            : Disabled
        LogFile Name               : debug.log
        Logging Level              : 31
        Listen Port Number         : 61235
        Status Refresh Delay       : 15s
        Verbose Mode               : Disabled
        SWD Debug                  : Enabled

Target connection mode: Default
Reading ROM table for AP 0 @0xe00fffd0
Hardware watchpoint supported by the target 
COM frequency = 4000 kHz
ST-LINK Firmware version : V2J38S7
Device ID: 0x414
PC: 0x800a138
ST-LINK device status: HALT_MODE
ST-LINK detects target voltage = 3.17 V
ST-LINK device status: HALT_MODE
ST-LINK device initialization OK
Waiting for debugger connection...
Waiting for connection on port 61235...
Accepted connection on port 61235...
Debugger connected
 ------ Switching to STM32CubeProgrammer ----- 
      -------------------------------------------------------------------
                       STM32CubeProgrammer v2.7.0-RC1                  
      -------------------------------------------------------------------

Error: C:\Users\客户\AppData\Local\Temp\STM32CubeProgrammer_a29528.log does not exist
ST-LINK SN  : 52FF6E066570555116301287
ST-LINK FW  : V2J38S7
Board       : --
Voltage     : 3.17V
SWD freq    : 4000 KHz
Connect mode: Under Reset
Reset mode  : Hardware reset
Device ID   : 0x414
Revision ID : Rev X
Device name : STM32F101/F103 High-density
Flash size  : 512 KBytes
Device type : MCU
Device CPU  : Cortex-M3

Memory Programming ...
Opening and parsing file: ST-LINK_GDB_server_a29528.srec
  File          : ST-LINK_GDB_server_a29528.srec
  Size          : 62008 Bytes
  Address       : 0x08000000

Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 30]
Download in Progress:
```