RTT Studio ST-Link 每次Debug调试前都出错，但下载程序正常

发布于 2020-07-21 17:27:49 浏览：2203 订阅该版

Starting server with the following options:
        Persistent Mode            : Disabled
        LogFile Name               : debug.log
        Logging Level              : 31
        Listen Port Number         : 61235
        Status Refresh Delay       : 15s
        Verbose Mode               : Disabled
        SWD Debug                  : Enabled

Target connection mode: Default
Hardware watchpoint supported by the target 
COM frequency = 4000 kHz
ST-LINK Firmware version : V2J34M25
Device ID: 0x414
PC: 0x800e0c8
ST-LINK device status: HALT_MODE
ST-LINK detects target voltage = 3.19 V
ST-LINK device status: HALT_MODE
ST-LINK device initialization OK
Waiting for debugger connection...
Waiting for connection on port 61235...
Accepted connection on port 61235...
Debugger connected
 ------ Switching to STM32CubeProgrammer ----- 
      -------------------------------------------------------------------
                       STM32CubeProgrammer v2.3.0                  
      -------------------------------------------------------------------

Error: C:\Users\瀹嬮�婃枃\AppData\Local\Temp\STM32CubeProgrammer_a31404.log does not exist
ST-LINK SN  : 0672FF575353667267191121
ST-LINK FW  : V2J34M25
Voltage     : 3.19V
SWD freq    : 4000 KHz
Connect mode: Under Reset
Reset mode  : Hardware reset
Device ID   : 0x414
Device name : STM32F101/F103 High-density
Flash size  : 512 KBytes
Device type : MCU
Device CPU  : Cortex-M3

Memory Programming ...
Opening and parsing file: ST-LINK_GDB_server_a31404.srec
  File          : ST-LINK_GDB_server_a31404.srec
  Size          : 93824 Bytes
  Address       : 0x08000000

Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 45]
Download in Progress:

File download complete
Time elapsed during download operation: 00:00:04.812
Encountered Error when opening D:/RT-ThreadStudio/repo/Extract/Debugger_Support_Packages/STMicroelectronics/ST-LINK_Debugger/1.2.0/tools/bin\STM32_Programmer_CLI.exe
 ------ Switching context ----- 
Error in STM32CubeProgrammer
Debugger connection lost.
Shutting down...

![QQ截图20200721172555.png](/uploads/20200721/9a20d14a603f076adb7ebeb82f8bc9a0.png)