探讨一下MDK下做radio软仿插件的可行性

发布于 2009-12-26 11:11:13 浏览：6428 订阅该版

先开个头，大家一起探讨探讨

利用keil的uVision 提供的agsi接口可制作keil的调试插件，实现在软仿真时模拟单片机外围器件，如GPIO、IIS、 SPI等。
查阅过一些资料，有人已经在keil C51上实现了模拟键盘，数码管等器件的插件DLL，
比如国内的平凡工作室，国外的[http://www.c51.de/c51.de/Dateien/uVision2DLLs.php?Spr=EN&UIN=](http://www.c51.de/c51.de/Dateien/uVision2DLLs.php?Spr=EN&UIN=)

在ARM下好像还没有人深入做过相关的插件
如果能够实现radio项目的所有外围器件的插件，那将是广大RTT迷的福音，对RTT的推广也将助力不少。

一下是我搜集一些相关资料
1.一些期刊论文
![KEIL_AGSI相关几篇论文.rar](/uploads/678_f12258149d052fcedc545a5253ba437f.rar)
2.keil的官方资料

**－－Application Note 154**
[http://www.keil.com/appnotes/docs/apnt_154.asp](http://www.keil.com/appnotes/docs/apnt_154.asp)
***Implementing DLLs for User-defined Simulation (AGSI)***
This application note shows how to create ?Vision DLLs for simulating user-defined hardware. This is useful for developers who wish to create high-performance simulation drivers for external hardware or for on-chip peripherals that are not directly supported by the Keil ?Vision Debugger. An example program that will help you get started is provided.

**－－Application Note 173**
[http://www.keil.com/appnotes/docs/apnt_173.asp](http://www.keil.com/appnotes/docs/apnt_173.asp)

***Implementing Interface DLLs for ARM Hardware Debuggers - Rev. 2***
This application note shows how to create ?Vision DLLs to interface to ARM based hardware debuggers. It is useful primarily to developers of hardware emulators and debugger interfaces. It describes the Flash programming interface that is available in ?Vision. You may use this information to erase and program Flash devices directly from the ?Vision IDE.

An example program to help you get started is provided.

**－－Application Note 204**
[http://www.keil.com/appnotes/docs/apnt_204.asp](http://www.keil.com/appnotes/docs/apnt_204.asp)
***RTOS-Viewer Plug-in***
This application note describes the RTOS-Viewer Plug-in concept and explains the implementation and programming steps required to add user-defined plug-ins to ?Vision4.