8266开启wifi框架不工作

发布于 2022-05-16 18:41:08 浏览：599 订阅该版

env 配置了 at 包，wi-fi framwork 包, 串口为 uart0 , mcu 为 gd32f407ret6, 初始化 log 显示正常

```
[18:16:53.828]收←◆
 \ | /
- RT -     Thread Operating System
 / | \     4.1.0 build May 16 2022 18:16:41
 2006 - 2022 Copyright by RT-Thread team
lwIP-2.0.3 initialized!
[4] D/led_disp: System LED Device init...

[8] D/led_disp: Business LED Device init...

[32m[12] I/sal.skt: Socket Abstraction Layer initialize success.
[0m[18] D/button_fun:  Button init ok...

[32m[22] I/at.clnt: AT client(V1.3.1) on device uart0 initialize success.
[0m[29] D/at.dev.esp: esp0 device initialize start.
[32m[48] I/at.dev.esp: esp0 device wifi is disconnect.
[0m
[18:16:54.889]收←◆[1050] D/at.dev.esp: AT version:1.2.0.0(Jul  1 2016 20:04:45)
[1056] D/at.dev.esp: SDK version:1.5.4.1(39cb9a32)
[1061] D/at.dev.esp: Wireless-Tag Technology Ltd.
[1065] D/at.dev.esp:

[18:16:57.195]收←◆[32m[3357] I/at.dev.esp: esp0 device wifi is connected.
[0m
[18:16:59.913]收←◆[32m[6075] I/at.dev.esp: esp0 device network initialize successfully.
[0m[6082] D/at.dev.esp: network interface device(esp0) set up status
[6087] D/led_disp: Business is off line
```

ip 工具也正常了

```
[18:17:04.948]收←◆ping baidu.com

[18:17:05.861]收←◆32 bytes from 220.181.38.148 icmp_seq=0 time=39 ms

[18:17:07.887]收←◆32 bytes from 220.181.38.148 icmp_seq=1 time=38 ms

[18:17:08.911]收←◆32 bytes from 220.181.38.148 icmp_seq=2 time=39 ms

[18:17:09.937]收←◆32 bytes from 220.181.38.148 icmp_seq=3 time=39 ms
msh >
msh >
[18:17:11.502]发→◇ifconfig
□
[18:17:11.511]收←◆ifconfig
network interface device: esp0 (Default)
MTU: 1500
MAC: e8 9f 6d 92 73 89 
FLAGS: UP LINK_UP INTERNET_UP DHCP_ENABLE
ip address: 192.168.0.219
gw address: 192.168.0.1
net mask  : 255.255.255.0
dns server #0: 0.0.0.0
dns server #1: 0.0.0.0
```
wifi 命令也有回复
```
[18:39:58.362]收←◆wifi
wifi
wifi help
wifi scan [SSID]
wifi join [SSID] [PASSWORD]
wifi ap SSID [PASSWORD]
wifi disc
wifi ap_stop
wifi status
wifi smartconfig
msh >
msh >
[18:40:01.629]发→◇wifi status
□
[18:40:01.633]收←◆wifi status
wifi disconnected!
wifi ap not start!
Auto Connect status:Disable!
msh >
```

问题来了，就是 wifi 命令不能操作 8266 ，如上图，有回复，但好像俩个没关系。