原子探索者407的BSP加片外FLASH编译失败

发布于 2021-06-27 17:46:29 浏览：1157 订阅该版

用的是`STUDIO 2.1.0` + 探索者 BSP

勾选了：
1. libc
2. spi bus device drivers
3. MTD NOR FLASH device drivers
4. fal
5. littleFS
之后编译，错误如下：
```
arm-none-eabi-gcc "../libraries/STM32F4xx_HAL/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c"
arm-none-eabi-gcc "../libraries/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/startup_stm32f407xx.s"
arm-none-eabi-gcc "../libraries/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c"
arm-none-eabi-gcc "../libraries/HAL_Drivers/drv_common.c"
arm-none-eabi-gcc "../libraries/HAL_Drivers/drv_gpio.c"
arm-none-eabi-gcc "../libraries/HAL_Drivers/drv_spi.c"
arm-none-eabi-gcc "../libraries/HAL_Drivers/drv_usart.c"
arm-none-eabi-gcc "../board/ports/spi_flash_init.c"
arm-none-eabi-gcc "../board/CubeMX_Config/Src/stm32f4xx_hal_msp.c"
arm-none-eabi-gcc "../board/board.c"
arm-none-eabi-gcc "../applications/main.c"
In file included from ../board/ports/spi_flash_init.c:12:0:
D:\RT-ThreadStudio\workspace\EXPLORER\rt-thread\components\drivers\spi/spi_flash.h:28:33: error: field 'mtd_device' has incomplete type
     struct rt_mtd_nor_device    mtd_device;
                                 ^
make: *** [board/ports/subdir.mk:18: board/ports/spi_flash_init.o] Error 1
make: *** Waiting for unfinished jobs....
"make -j8 all" terminated with exit code 2. Build might be incomplete.
```

123 认证专家 2021-06-27

这家伙很懒，什么也没写！

Juggernaut 2021-06-27

①②③

123 2021-06-28

这家伙很懒，什么也没写！

123 2021-06-28

这家伙很懒，什么也没写！

请登录后再发布评论，点击登录

追加回复

2 个回答

Juggernaut 2021-06-28

①②③

搞定，这个BSP里面居然还有个port文件夹，需要修改其中的flash init代码；
---
```
 \ | /
- RT -     Thread Operating System
 / | \     4.0.3 build Jun 28 2021
 2006 - 2021 Copyright by rt-thread team
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud.c:862) The flash device manufacturer ID is 0xEF, memory type ID is 0x40, ca[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:132) Check SFDP header is OK. The reversion is V1.5, NPN is 0.[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:175) Check JEDEC basic flash parameter header is OK. The table id is[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:203) JEDEC basic flash parameter table info:[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:204) MSB-LSB  3    2    1    0[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:207) [0001] 0xFF 0xF9 0x20 0xE5[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:207) [0002] 0x07 0xFF 0xFF 0xFF[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:207) [0003] 0x6B 0x08 0xEB 0x44[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:207) [0004] 0xBB 0x42 0x3B 0x08[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:207) [0005] 0xFF 0xFF 0xFF 0xFE[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:207) [0006] 0x00 0x00 0xFF 0xFF[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:207) [0007] 0xEB 0x40 0xFF 0xFF[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:207) [0008] 0x52 0x0F 0x20 0x0C[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:207) [0009] 0x00 0x00 0xD8 0x10[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:215) 4 KB Erase is supported throughout the device. Command is 0x20.[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:234) Write granularity is 64 bytes or larger.[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:245) Target flash status register is non-volatile.[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:271) 3-Byte only addressing.[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:305) Capacity is 16777216 Bytes.[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:312) Flash device supports 4KB block erase. Command is 0x20.[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:312) Flash device supports 32KB block erase. Command is 0x52.[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud_sfdp.c:312) Flash device supports 64KB block erase. Command is 0xD8.[0m
[32m[I/SFUD] Find a Winbond flash chip. Size is 16777216 bytes.[0m
[0m[D/SFUD] (../rt-thread/components/drivers/spi/sfud/src/sfud.c:840) Flash device reset success.[0m
[32m[I/SFUD] W25Q128 flash device is initialize success.[0m
[32m[I/SFUD] Probe SPI flash W25Q128 by SPI device spi10 success.[0m
[D/FAL] (fal_flash_init:63) Flash device |                  W25Q128 | addr: 0x00000000 | len: 0x01000000 | blk_size: 0x00001000 |initialized finish.
[32;22m[I/FAL] ==================== FAL partition table ====================[0m
[32;22m[I/FAL] | name      | flash_dev |   offset   |    length  |[0m
[32;22m[I/FAL] -------------------------------------------------------------[0m
[32;22m[I/FAL] | easyflash | W25Q128   | 0x00000000 | 0x00100000 |[0m
[32;22m[I/FAL] | download  | W25Q128   | 0x00100000 | 0x00700000 |[0m
[32;22m[I/FAL] =============================================================[0m
[32;22m[I/FAL] RT-Thread Flash Abstraction Layer (V0.5.0) initialize success.[0m
[32;22m[I/FAL] The FAL MTD NOR device (download) created successfully[0m
[32m[I/SFUD] Filesystem initialized![0m
[0m[D/main] Hello RT-Thread![0m
msh />list_device
device           type         ref count
-------- -------------------- ----------
download MTD Device           1       
W25Q128  Block Device         0       
spi10    SPI Device           0       
spi2     SPI Bus              0       
spi1     SPI Bus              0       
uart1    Character Device     2       
pin      Miscellaneous Device 0      
msh />echo "Hello, RT-THREAD~"  hello.txt
msh />ls
Directory /:
hello.txt           17                       
msh />cat hello.txt
Hello, RT-THREAD~
msh />
```