RT-Thread-英飞凌PSoC™ 62开发板 X CYW43012 WiFi蓝牙二合一模块试用RT-Thread问答社区

英飞凌PSoC™ 62开发板 X CYW43012 WiFi蓝牙二合一模块试用

发布于 2024-02-04 17:18:38 浏览：238 订阅该版

[tocm]

首先感谢英飞凌&RT-Thread提供开发板！
已经收到板子很久，由于年底没有空玩这个开发板，搁置到现在才拿出来测试。
先上图片
![微信图片_20240204170016.jpg](https://oss-club.rt-thread.org/uploads/20240204/923a52a44d612e999900c94dd3e8581e.jpg.webp)
一、硬件介绍
PSoC™ 62 with CAPSENSE™ evaluation kit开发板基于CY8C624ALQI_S2D42 ，芯片集成 2MB 内部 Flash 和 1MB SRAM。具有单周期乘法的150-MHz Arm Cortex-M4F CPU (浮点和存储器保护单元)，100-MHz Cortex M0+ CPU，带单周期乘法和 MPU，可以充分发挥 PSoC6 双核芯片性能。
![微信图片_20240204170005.jpg](https://oss-club.rt-thread.org/uploads/20240204/2003ce55bbeba8e66a327f6285c365a9.jpg.webp)
Cypress全新的CYW43012 Wi-Fi +蓝牙组合专门设计用于物联网应用。CYW43012采用28nm超低功耗技术和增强的低功耗模式。CYW43012是业界首款802.11ac-friendly™产品。802.11ac-friendly模式可与IEEE 802.11ac接入点完全互操作，并支持物联网应用尽量保持较低功耗，同时利用关键的802.11ac特性，如高效的256-QAM，该特性支持更短的活动时间、更长的距离以及带隐式波束成形的覆盖范围。

本次试用的CYW43012 WiFi蓝牙二合一模块是贝能生产的，可直接插在PSoC™ 62 with CAPSENSE™ evaluation kit开发板上，释放开发板原来的Arduino接口。

二、RT-Thread工程创建
安装bsp的SDK
![screenshot_image.png](https://oss-club.rt-thread.org/uploads/20240204/b56aefaf2dc2d44e0ded53679830fcbe.png.webp)
创建工程
![screenshot_image.png](https://oss-club.rt-thread.org/uploads/20240204/37edfd60653bba09ef66de7dc13a8da7.png.webp)
三、编译及烧录

![screenshot_image.png](https://oss-club.rt-thread.org/uploads/20240204/f5a0180739a31cc0d3db16f4f604d41e.png)

```c
Info : psoc6.cpu.cm4: hardware has 6 breakpoints, 4 watchpoints
Info : starting gdb server for psoc6.cpu.cm0 on 3333
Info : Listening on port 3333 for gdb connections
Info : starting gdb server for psoc6.cpu.cm4 on 3334
Info : Listening on port 3334 for gdb connections
Info : SWD DPIDR 0x6ba02477
Info : kitprog3: acquiring the device (mode: reset)...
psoc6.cpu.cm0 halted due to debug-request, current mode: Thread 
xPSR: 0x41000000 pc: 0x00000190 msp: 0x080ff800
** Device acquired successfully
** psoc6.cpu.cm4: Ran after reset and before halt...
psoc6.cpu.cm4 halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x0000012a msp: 0x080ff800
** Programming Started **
auto erase enabled
Info : Flash write discontinued at 0x10001848, next section at 0x10002000
Info : Padding image section 0 at 0x10001848 with 440 bytes (bank write end alignment)
[100%] [################################] [ Erasing     ]
[100%] [################################] [ Programming ]
Info : Padding image section 1 at 0x10018fd8 with 40 bytes (bank write end alignment)
[  8%] [##                              ] [ Erasing     ]
[ 10%] [###                             ] [ Erasing     ]
[ 13%] [####                            ] [ Erasing     ]
[ 16%] [#####                           ] [ Erasing     ]
[ 19%] [######                          ] [ Erasing     ]
[ 22%] [#######                         ] [ Erasing     ]
[ 25%] [########                        ] [ Erasing     ]
[ 29%] [#########                       ] [ Erasing     ]
[ 32%] [##########                      ] [ Erasing     ]
[ 35%] [###########                     ] [ Erasing     ]
[ 38%] [############                    ] [ Erasing     ]
[ 41%] [#############                   ] [ Erasing     ]
[ 44%] [##############                  ] [ Erasing     ]
[ 47%] [###############                 ] [ Erasing     ]
[ 50%] [################                ] [ Erasing     ]
[ 54%] [#################               ] [ Erasing     ]
[ 57%] [##################              ] [ Erasing     ]
[ 60%] [###################             ] [ Erasing     ]
[ 63%] [####################            ] [ Erasing     ]
[ 66%] [#####################           ] [ Erasing     ]
[ 69%] [######################          ] [ Erasing     ]
[ 72%] [#######################         ] [ Erasing     ]
[ 75%] [########################        ] [ Erasing     ]
[ 79%] [#########################       ] [ Erasing     ]
[ 82%] [##########################      ] [ Erasing     ]
[ 85%] [###########################     ] [ Erasing     ]
[ 88%] [############################    ] [ Erasing     ]
[ 91%] [#############################   ] [ Erasing     ]
[ 94%] [##############################  ] [ Erasing     ]
[ 97%] [############################### ] [ Erasing     ]
[100%] [################################] [ Erasing     ]
[ 31%] [#########                       ] [ Programming ]
[ 32%] [##########                      ] [ Programming ]
[ 37%] [###########                     ] [ Programming ]
[ 41%] [#############                   ] [ Programming ]
[ 46%] [##############                  ] [ Programming ]
[ 54%] [#################               ] [ Programming ]
[ 64%] [####################            ] [ Programming ]
[ 78%] [########################        ] [ Programming ]
[ 95%] [##############################  ] [ Programming ]
[100%] [################################] [ Programming ]
wrote 100864 bytes from file D:/RT-ThreadStudio/workspace/Pcos62/Debug/rtthread.hex in 3.126802s (31.502 KiB/s)
** Programming Finished **
shutdown command invoked
Info : psoc6.dap: powering down debug domain...
```
led会闪烁，在此psoc6的编程环境已经配置完成，我们就可以修改代码测试其他模块了。