RT-Thread一般讨论

继续K9ii的历程

发布于 2008-09-12 20:47:46 浏览：5956 订阅该版

2 个回答

bernard 2008-09-12

这家伙很懒，什么也没写！

K9ii开发板用的bootloader是u-boot，采用如下方式下载RT-Thread RTOS：
```
tftpboot 0x20008000 rtthread-AT9200.bin
```
（需要在PC上启动个tftp server）
把`rtthread-AT9200.bin`文件下载到板子上的0x20008000的位置，`rtthread-AT9200.bin`是RT-Thread的二进制文件，在`bsp\AT9200`目录下

```
go 0x20008000
```
从0x20008000位置开始运行

整个开始运行画面：
```
Enter k9-Uboot
Boot Begin from 0x20F00000...

U-Boot 1.0.0 (Mar 17 2007 - 11:22:29)

U-Boot code: 20F00000 -> 20F13684  BSS: -> 20F1703C
DRAM Configuration:
Bank #0: 20000000 16 MB
Flash:  4 MB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
K9Uboot> tftpboot 0x20008000 rtthread-AT9200.bin
TFTP from server 192.168.1.150; our IP address is 192.168.1.6
Filename 'rtthread-AT9200.bin'.
Load address: 0x20008000
Loading: ##############################################
done
Bytes transferred = 231484 (3883c hex)
K9Uboot> go 0x20008000
## Starting application at 0x20008000 ...
 \ | /
- RT - Thread Operating System
 / | \ 0.2.3 build Sep 12 2008
 2006, 2007, 2008 Copyright by rt-thread team
netif: IP address of interface E0 set to 0.0.0.0
netif: netmask of interface E0 set to 255.255.255.255
netif: GW address of interface E0 set to 0.0.0.0
finsh>>udp_bind(ipaddr = , port = 0)
netif_set_ipaddr: netif address being changed
netif: IP address of interface E0 set to 192.168.1.30
netif: netmask of interface E0 set to 255.255.255.0
netif: GW address of interface E0 set to 0.0.0.0
TCP/IP initialized!
        0, 0x0000
```