下载程序错误

rt thread studio 下载

发布于 2021-05-14 10:37:00 浏览：1320 订阅该版

工程编译完成，下载不能成功，不知是什么原因？

Download Start Address: 0x60000000

开始下载程序：2021-05-14 14:31:11
D:\RT-ThreadStudio>"D:/RT-ThreadStudio//repo/Extract/Debugger_Support_Packages/SEGGER/J-Link/6.80d/JLink.exe" -device MIMXRT1052DVL6A -ExitOnError -CommanderScript D:\RT-ThreadStudio\workspace/.metadata/Temp/rtthread_download_init.jlink 
SEGGER J-Link Commander V6.80d (Compiled Jun 26 2020 17:17:12)
DLL version V6.80d, compiled Jun 26 2020 17:16:09
J-Link Commander will now exit on Error
J-Link Command File read successfully.
Processing script file...
J-Link connection not established yet but required for command.
Connecting to J-Link via USB...O.K.
Firmware: J-Link V9 compiled Jun  2 2222 22:22:22
Hardware version: V9.60
S/N: 59611001
License(s): GDB, RDI, FlashBP, FlashDL, JFlash, RDDI
VTref=3.301V
Selecting SWD as current target interface.
Device "MIMXRT1052DVL6A" selected.
Selecting auto as target interface speed
Target connection not established yet but required for command.
Device "MIMXRT1052DVL6A" selected.
Connecting to target via SWD
InitTarget() start
InitTarget()
_TargetHalt: CPU halted
InitTarget() end
Found SW-DP with ID 0x0BD11477
Unknown DP version. Assuming DPv0
Scanning AP map to find all available APs
AP[1]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x04770041)
Iterating through AP map to find AHB-AP to use
AP[0]: Core found
AP[0]: AHB-AP ROM base: 0xE00FD000
CPUID register: 0x411FC271. Implementer code: 0x41 (ARM)
Found Cortex-M7 r1p1, Little endian.
FPUnit: 8 code (BP) slots and 0 literal slots
CoreSight components:
ROMTbl[0] @ E00FD000
ROMTbl[0][0]: E00FE000, CID: B105100D, PID: 000BB4C8 ROM Table
ROMTbl[1] @ E00FE000
ROMTbl[1][0]: E00FF000, CID: B105100D, PID: 000BB4C7 ROM Table
ROMTbl[2] @ E00FF000
ROMTbl[2][0]: E000E000, CID: B105E00D, PID: 000BB00C SCS-M7
ROMTbl[2][1]: E0001000, CID: B105E00D, PID: 000BB002 DWT
ROMTbl[2][2]: E0002000, CID: B105E00D, PID: 000BB00E FPB-M7
ROMTbl[2][3]: E0000000, CID: B105E00D, PID: 000BB001 ITM
ROMTbl[1][1]: E0041000, CID: B105900D, PID: 001BB975 ETM-M7
ROMTbl[1][2]: E0042000, CID: B105900D, PID: 004BB906 CTI
ROMTbl[0][1]: E0040000, CID: B105900D, PID: 000BB9A9 TPIU-M7
ROMTbl[0][2]: E0043000, CID: B105F00D, PID: 001BB101 TSG
Cache: Separate I- and D-cache.
I-Cache L1: 32 KB, 512 Sets, 32 Bytes/Line, 2-Way
D-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
Cortex-M7 identified.
Reset delay: 0 ms
Reset type NORMAL: Resets core & peripherals via SYSRESETREQ & VECTRESET bit.
Reset: Halt core after reset via DEMCR.VC_CORERESET.
Reset: Reset device via AIRCR.SYSRESETREQ.
PC = 00201414, CycleCnt = 00000000
R0 = 00000000, R1 = 00000000, R2 = 00000000, R3 = 00000000
R4 = 00000000, R5 = 00000000, R6 = 00000000, R7 = 00000000
R8 = 00000000, R9 = 00000000, R10= 00000000, R11= 00000000
R12= 00000000
SP(R13)= 20201000, MSP= 20201000, PSP= 00000000, R14(LR) = FFFFFFFF
XPSR = 01000000: APSR = nzcvq, EPSR = 01000000, IPSR = 000 (NoException)
CFBP = 00000000, CONTROL = 00, FAULTMASK = 00, BASEPRI = 00, PRIMASK = 00
FPS0 = 00000000, FPS1 = 00000000, FPS2 = 00000000, FPS3 = 00000000
FPS4 = 00000000, FPS5 = 00000000, FPS6 = 00000000, FPS7 = 00000000
FPS8 = 00000000, FPS9 = 00000000, FPS10= 00000000, FPS11= 00000000
FPS12= 00000000, FPS13= 00000000, FPS14= 00000000, FPS15= FFFFFFFF
FPS16= 00000000, FPS17= 00000000, FPS18= 00000000, FPS19= 00000000
FPS20= 00000000, FPS21= 00000000, FPS22= 00000000, FPS23= 00000000
FPS24= 00000000, FPS25= 00000000, FPS26= 00000000, FPS27= 00000000
FPS28= 00000000, FPS29= 00000000, FPS30= 00000000, FPS31= FFFFFFFF
FPSCR= 00000000
Downloading file [D:\RT-ThreadStudio\workspace\rtt1052\Debug\rtthread.bin]...
****** Error: Timeout while restoring target, core does not stop. (PC = 0x6003689A, XPSR = 0x21000003, SP = 0x2000F8BC)!
Cannot read register 15 (R15) while CPU is runningCannot read register 7 (R7) while CPU is runningCannot read register 6 (R6) while CPU is runningCannot read register 5 (R5) while CPU is runningCannot read register 4 (R4) while CPU is runningCannot read register 3 (R3) while CPU is runningCannot read register 2 (R2) while CPU is runningCannot read register 1 (R1) while CPU is runningCannot read register 0 (R0) while CPU is runningCannot read register 15 (R15) while CPU is runningPC of target system has unexpected value after preparing target. (PC = 0x00000000)!
---------------------------------------------------------------------- Registers -------------------------------------------------------------------------------------
    	PC   = 00000000
Current:	R0   = 00000000,	R1   = 00000000,	R2   = 00000000,	R3   = 00000000
    	R4   = 00000000,	R5   = 00000000,	R6   = 00000000,	R7   = 00000000
------------
Unspecified error -1
Script processing completed.
执行完毕, 耗时：6062ms.