5 添加lwgps包之后不能正确解析出经纬度、时间信息

发布于 2022-08-05 14:45:15 浏览：632 订阅该版

在添加了lwgps后，测试用例使用不了，有同学弄过这一块吗？我的怎么就是不行呢....  我用的是和芯星通的GPS芯片。

```c
//*****************************************************************************
// file        : lwgps2rtt.c
// porting lwgps to rt-thread
//
// Change Logs:
// Date                 Author      Note
// 2020/09/05           Cheney      First draft version
// 2020/09/13           Cheney      1. Update the comments.
//                                  2. Support gps info query interface.
// 2020/10/10           Cheney      Support macros LWGPS_CFG_STATUS
// 2020/12/15           Cheney      Configure the uart before using it.
//
//*****************************************************************************

//*****************************************************************************
//
//! \addtogroup lwgps
//! @{
//
//*****************************************************************************
#include <rtthread.h>
#include <rtdevice.h>
#include <board.h>

#include "lwgps.h"

#ifndef GPS_MODULE_BAUD_RATE
#define GPS_MODULE_BAUD_RATE        BAUD_RATE_9600
#endif

static lwgps_t h_lwgps;

static rt_device_t serial = RT_NULL;
static struct rt_semaphore rx_sem;
static rt_thread_t lwgps_tid = RT_NULL;
static rt_mutex_t lwgps_mutex = RT_NULL;

/**
 * \brief gps uart date received callback
 *
 * \param dev: uart device
 * \param size: data size
 * \return rt_err_t: operation result.
 */
static rt_err_t uart_input(rt_device_t dev, rt_size_t size)
{
    rt_sem_release(&rx_sem);
    return RT_EOK;
}

#if LWGPS_CFG_STATUS == 1
void lwgps_process_cbk(lwgps_statement_t res) 
{
    // TODO: give the interface to user.
}
#endif

/**
 * \brief lwgps process thread
 *
 * \param parameter: input parameters.
 */
static void lwgps_thread_entry(void *parameter)
{
    rt_uint8_t ch;

while (RT_TRUE)
    {
        rt_sem_take(&rx_sem, RT_TICK_PER_SECOND);

while (rt_device_read(serial, -1, &ch, 1) == 1)
        {
            rt_mutex_take(lwgps_mutex, RT_WAITING_FOREVER);
            rt_kprintf("%c",ch);
#if LWGPS_CFG_STATUS == 1
            lwgps_process(&h_lwgps, &ch, 1, lwgps_process_cbk);
#else
            lwgps_process(&h_lwgps, &ch, 1);
//            rt_kprintf("Valid status: %d\r\n", h_lwgps.is_valid);
//            rt_kprintf("Latitude: %f degrees\r\n", h_lwgps.latitude);
//            rt_kprintf("Longitude: %f degrees\r\n", h_lwgps.longitude);
//            rt_kprintf("Altitude: %f meters\r\n", h_lwgps.altitude);
#endif
            rt_mutex_release(lwgps_mutex);
        }
    }
}
/**
 * \brief get gps information
 *
 * \param gps_info: gps information.
 */
void lwgps2rtt_get_gps_info(lwgps_t *gps_info)
{
    rt_mutex_take(lwgps_mutex, RT_WAITING_FOREVER);
    rt_memcpy(gps_info, &h_lwgps, (sizeof(h_lwgps) - sizeof(h_lwgps.p)));
    //rt_kprintf("latitude is %f\n",gps_info)
    rt_mutex_release(lwgps_mutex);
}
/**
 * \brief module init
 *
 * \param uart_dev_name: uart device name
 */
void lwgps2rtt_init(void)
{
    serial = rt_device_find("uart3");
    if (!serial)
    {
        rt_kprintf("uart find %s failed!\n", "uart3");
        return;
    }

struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
    config.baud_rate = GPS_MODULE_BAUD_RATE;
    config.data_bits = DATA_BITS_8;
    config.stop_bits = STOP_BITS_1;
    config.parity    = PARITY_NONE;
    rt_device_control(serial, RT_DEVICE_CTRL_CONFIG, &config);

lwgps_mutex = rt_mutex_create("lwgps_mutex", RT_IPC_FLAG_FIFO);

rt_sem_init(&rx_sem, "rx_sem", 0, RT_IPC_FLAG_FIFO);
    rt_device_open(serial, RT_DEVICE_FLAG_INT_RX);
    rt_device_set_rx_indicate(serial, uart_input);

lwgps_init(&h_lwgps);

lwgps_tid = rt_thread_create("lwgps", lwgps_thread_entry, RT_NULL, 2048, 20, 4);
    if (lwgps_tid != RT_NULL)
        rt_thread_startup(lwgps_tid);
}

/**
 * \brief module deinit
 *
 */
void lwgps2rtt_deinit(void)
{
    if (serial != RT_NULL)
    {
        rt_device_close(serial);
        rt_device_set_rx_indicate(serial, RT_NULL);
    }

if (lwgps_tid != RT_NULL)
    {
        rt_thread_delete(lwgps_tid);
    }

if (lwgps_mutex != RT_NULL)
    {
        rt_mutex_delete(lwgps_mutex);
    }

serial = RT_NULL;
    lwgps_tid = RT_NULL;
    lwgps_mutex = RT_NULL;
}
INIT_APP_EXPORT(lwgps2rtt_init);
```
```C
#include <rtthread.h>

#define DBG_TAG "main"
#define DBG_LVL DBG_LOG
#include <rtdbg.h>
#include "lwgps/lwgps.h"
lwgps_t gps_info;
int main(void)
{
    int count = 1;

while (1)
    {
        //LOG_D("Hello RT-Thread!");
        //rt_thread_mdelay(1000);
        lwgps2rtt_get_gps_info(&gps_info);
        rt_kprintf("hour: %d\r\n", gps_info.hours);
        rt_kprintf("minute: %d\r\n", gps_info.minutes);
        rt_kprintf("seconds: %d\r\n", gps_info.seconds);
        rt_kprintf("Latitude: %f degrees\r\n", gps_info.latitude);
        rt_kprintf("Longitude: %f degrees\r\n", gps_info.longitude);
        rt_kprintf("Altitude: %f meters\r\n", gps_info.altitude);

}

return RT_EOK;
}
```
测试打印如图所示
![xgy_20220805144247.jpg](https://oss-club.rt-thread.org/uploads/20220805/fe9e752f7fcdd2d31f888eac9591a6b0.jpg "xgy_20220805144247.jpg")

3 个回答

OGES_7242 2023-03-19

这家伙很懒，什么也没写！

Agony_L 2023-05-06

这家伙很懒，什么也没写！

Agony_L 2023-05-06

这家伙很懒，什么也没写！

请登录后再发布评论，点击登录

追加回复

出出啊 2022-08-05

恃人不如自恃，人之为己者不如己之自为也

xinggaoyong 2022-08-05

这家伙很懒，什么也没写！

请登录后再发布评论，点击登录

追加回复

xinggaoyong 2022-08-07

这家伙很懒，什么也没写！

对lwgps2rtt.c文件做了如下修改，大家可以对照，可以正确的解析GPS数据了。

```c
//*****************************************************************************
// file        : lwgps2rtt.c
// porting lwgps to rt-thread
//
// Change Logs:
// Date                 Author      Note
// 2020/09/05           Cheney      First draft version
// 2020/09/13           Cheney      1. Update the comments.
//                                  2. Support gps info query interface.
// 2020/10/10           Cheney      Support macros LWGPS_CFG_STATUS
// 2020/12/15           Cheney      Configure the uart before using it.
//
//*****************************************************************************

//*****************************************************************************
//
//! \addtogroup lwgps
//! @{
//
//*****************************************************************************
#include <rtthread.h>
#include <rtdevice.h>
#include <board.h>

#include "lwgps.h"

#ifndef GPS_MODULE_BAUD_RATE
#define GPS_MODULE_BAUD_RATE        BAUD_RATE_9600
#endif

static lwgps_t h_lwgps;
struct rt_ringbuffer  rb ;
static rt_uint8_t gpspool[200];
static rt_device_t serial = RT_NULL;
static struct rt_semaphore rx_sem;
static rt_thread_t lwgps_tid = RT_NULL;
static rt_mutex_t lwgps_mutex = RT_NULL;
static rt_mutex_t uart_mutex = RT_NULL;
/**
 * \brief gps uart date received callback
 *
 * \param dev: uart device
 * \param size: data size
 * \return rt_err_t: operation result.
 */
static rt_err_t uart_input(rt_device_t dev, rt_size_t size)
{
    rt_sem_release(&rx_sem);
    return RT_EOK;
}

#if LWGPS_CFG_STATUS == 1
void lwgps_process_cbk(lwgps_statement_t res) 
{
    // TODO: give the interface to user.
}
#endif

/**
 * \brief lwgps process thread
 *
 * \param parameter: input parameters.
 */
static void lwgps_thread_entry(void *parameter)
{
    rt_uint8_t ch[100];
    rt_uint8_t arr[150];
    rt_uint8_t count = 0,result;
    while (RT_TRUE)
    {
        rt_sem_take(&rx_sem, RT_WAITING_FOREVER);

/*add by xinggaoyong */
        result = rt_device_read(serial, -1, ch, 100);
        rt_ringbuffer_put(&rb, ch, result);
        count = count + result;

if (count >= 100)
        {

rt_mutex_take(lwgps_mutex, RT_WAITING_FOREVER);
            rt_ringbuffer_get(&rb, arr, count);
#if LWGPS_CFG_STATUS == 1
            lwgps_process(&h_lwgps, arr, count, lwgps_process_cbk);
#else
            lwgps_process(&h_lwgps, arr, count);

/*处理结束后，清零count*/
            count = 0;

#endif
            rt_mutex_release(lwgps_mutex);
        }
    }
}
/**
 * \brief get gps information
 *
 * \param gps_info: gps information.
 */
void lwgps2rtt_get_gps_info(lwgps_t *gps_info)
{
    rt_mutex_take(lwgps_mutex, RT_WAITING_FOREVER);
    rt_memcpy(gps_info, &h_lwgps, (sizeof(h_lwgps) - sizeof(h_lwgps.p)));
    //rt_kprintf("latitude is %f\n",gps_info)
    rt_mutex_release(lwgps_mutex);
}
/**
 * \brief module init
 *
 * \param uart_dev_name: uart device name
 */
void lwgps2rtt_init(void)
{
    rt_ringbuffer_init(&rb,gpspool,150);
    serial = rt_device_find("uart3");
    if (!serial)
    {
        rt_kprintf("uart find %s failed!\n", "uart3");
        return;
    }

struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
    config.baud_rate = GPS_MODULE_BAUD_RATE;
    config.data_bits = DATA_BITS_8;
    config.stop_bits = STOP_BITS_1;
    config.parity    = PARITY_NONE;
    rt_device_control(serial, RT_DEVICE_CTRL_CONFIG, &config);

lwgps_mutex = rt_mutex_create("lwgps_mutex", RT_IPC_FLAG_FIFO);
    uart_mutex = rt_mutex_create("uart_mutex", RT_IPC_FLAG_FIFO);
    rt_sem_init(&rx_sem, "rx_sem", 0, RT_IPC_FLAG_FIFO);
    rt_device_open(serial, RT_DEVICE_FLAG_INT_RX);
    //rt_device_open(serial, RT_DEVICE_FLAG_RX_NON_BLOCKING | RT_DEVICE_FLAG_TX_BLOCKING);

rt_device_set_rx_indicate(serial, uart_input);

lwgps_init(&h_lwgps);

lwgps_tid = rt_thread_create("lwgps", lwgps_thread_entry, RT_NULL, 2048, 20, 4);
    if (lwgps_tid != RT_NULL)
        rt_thread_startup(lwgps_tid);
}

/**
 * \brief module deinit
 *
 */
void lwgps2rtt_deinit(void)
{
    if (serial != RT_NULL)
    {
        rt_device_close(serial);
        rt_device_set_rx_indicate(serial, RT_NULL);
    }

if (lwgps_tid != RT_NULL)
    {
        rt_thread_delete(lwgps_tid);
    }

if (lwgps_mutex != RT_NULL)
    {
        rt_mutex_delete(lwgps_mutex);
    }

serial = RT_NULL;
    lwgps_tid = RT_NULL;
    lwgps_mutex = RT_NULL;
}
/*add by xinggaoyong*/
INIT_APP_EXPORT(lwgps2rtt_init);
//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************

```