FinSH

stm32F103vet6 nano rt-thread-3.1.3 添加finsh 报错

发布于 2019-12-30 09:39:11 浏览：1326 订阅该版

stm32F103vet6  配合 rt-thread-3.1.3 版本，不加finsh 是可以正常运行，并且rt_kprintf也能正常打印的
添加finsh后，报错
[09:38:04.983]收←◆
 \ | /
- RT -     Thread O
[09:38:05.021]收←◆perating System
 / | \     3.1.3 build Dec 30 2019
 2006 - 2019 Copyright by rt-thread team
psr: 0x41000000
r00: 0x20008b1c
r01: 0x20001030
r02: 0x00000000
r03: 0x00200000
r04: 0x00000000
r05: 0x2000101c
r06: 0x20008b1c
r07: 0x20001030
r08: 0xdeadbeef
r09: 0xdeadbeef
r10: 0xdeadbeef
r11: 0xdeadbeef
r12: 0x00000000
 lr: 0x08004491
 pc: 0x080044ea
hard fault on thread: tshell
thread   pri  status      sp     stack size max used left tick  error
-------- ---  ------- ---------- ----------  ------  ---------- ---
AT24CM01  16  suspend 0x00000058 0x00000400    08%   0x00000014 000
w5500_th  16  suspend 0x00000068 0x00000200    26%   0x00000014 000
mb_send_  16  suspend 0x00000058 0x00000200    51%   0x00000013 000
vol_curr  16  suspend 0x00000060 0x00000200    18%   0x00000014 000
run_stat  16  suspend 0x00000058 0x00000200    17%   0x00000014 000
key_entr  16  suspend 0x00000058 0x00000200    17%   0x00000014 000
check_us  16  suspend 0x00000058 0x00000280    13%   0x00000014 000
tshell    21  suspend 0x00000040 0x00000400    12%   0x00000014 000
tidle     31  ready   0x00000040 0x00000100    25%   0x00000020 000
main      10  close   0x00000044 0x00000400    20%   0x00000013 000
bus fault:
SCB_CFSR_BFSR:0x04 IMPRECISERR