linux下搭建环境的问题

发布于 2013-08-04 15:33:46 浏览：2736 订阅该版

eclipse已经可以编译RTT官方例程了，终端中已经可以驱动到J-Link>命令了
问题：
1, eclipse生成的只看到axf，J-Link是不是刷Hex格式的？
2, 试着将jlink烧录和调试都放在elipse下面，烧录总是不成功。
如下提示：
```
SEGGER J-Link Commander V4.74 ('?' for help)
Compiled Jul 17 2013 11:52:37

Script file read successfully.
DLL version V4.74, compiled Jul 17 2013 11:52:31
Firmware: J-Link ARM V8 compiled Jul 17 2013 11:24:15
Hardware: V8.00
S/N: xxxxxxxx
Feature(s): RDI,FlashDL,FlashBP,JFlash 
VTarget = 3.325V
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info: FPUnit: 6 code (BP) slots and 2 literal slots
Found 2 JTAG devices, Total IRLen = 9:
 #0 Id: 0x3BA00477, IRLen: 04, IRPrint: 0x1, CoreSight JTAG-DP (ARM)
 #1 Id: 0x06414041, IRLen: 05, IRPrint: 0x1, STM32 Boundary Scan
Cortex-M3 identified.
JTAG speed: 100 kHz
Processing script file...

R0 = 00000001, R1 = 200015E8, R2 = 200011B8, R3 = 00000001
R4 = DEADBEEF, R5 = DEADBEEF, R6 = DEADBEEF, R7 = 20000628
R8 = DEADBEEF, R9 = DEADBEEF, R10= DEADBEEF, R11= DEADBEEF
R12= 00000000, R13= 20000628, MSP= 200001B8, PSP= 20000628
R14(LR) = 080017C1, R15(PC) = 08001870
XPSR = 21000000, APSR = 20000000, EPSR = 01000000, IPSR = 00000000
CFBP = 02000000, CONTROL = 02, FAULTMASK = 00, BASEPRI = 00, PRIMASK = 00
CycleCnt = BD24BBBD

JTAG speed: 4800 kHz

Info: Device "STM32F103ZE" selected (512 KB flash, 64 KB RAM).

Loading binary file... [rtthread.bin]
Writing bin data into target memory @ 0x08000000.
Info: J-Link: Flash download: Flash programming was not necessary
Info: J-Link: Flash download: Total time needed: 0.082s (Prepare: 0.055s, Compare: 0.021s, Erase: 0.000s, Program: 0.000s, Verify: 0.000s, Restore: 0.004s)

Reset delay: 0 ms
Reset type NORMAL: Resets core & peripherals via SYSRESETREQ & VECTRESET bit.
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info: FPUnit: 6 code (BP) slots and 2 literal slots
Script processing completed.
```