RT-Thread Studio使用ST-Linlk调试遇到问题

发布于 2020-01-06 17:25:29 浏览：2563 订阅该版

C:\RT-ThreadStudio>cd C:/RT-ThreadStudio/platform/ST-LINK

C:\RT-ThreadStudio\platform\ST-LINK>C:/RT-ThreadStudio/platform/ST-LINK/ST-LINK_gdbserver.exe -c C:/RT-ThreadStudio/platform/ST-LINK/config.txt

Starting server with the following options:
        Persistent Mode            : Disabled
        LogFile Name               : debug.log
        Logging Level              : 31
        Listen Port Number         : 61234
        Status Refresh Delay       : 15s
        Verbose Mode               : Disabled
        SWD Debug                  : Enabled

Hardware watchpoint supported by the target 
SWD frequency = 4000 kHz
ST-LINK Firmware version : V2J33S25
Device ID: 0x470
PC: 0x8009f9c
ST-LINK device status: HALT_MODE
ST-LINK detects target voltage = 3.27 V
ST-LINK device status: HALT_MODE
ST-LINK device initialization OK
Waiting for debugger connection...
Waiting for connection on port 61234...
Accepted connection on port 61234...
Debugger connected
 ------ Switching to STM32CubeProgrammer ----- 
      -------------------------------------------------------------------
                       STM32CubeProgrammer v2.1.0                  
      -------------------------------------------------------------------

Error: C:\Users\榻愭案蹇燶AppData\Local\Temp\STM32CubeProgrammer_a04032.log does not exist
ST-LINK SN  : 0669FF575550897767143946
ST-LINK FW  : V2J33M25
Voltage     : 3.26V
SWD freq    : 4000 KHz
Connect mode: Under Reset
Reset mode  : Hardware reset
Device ID   : 0x470
Device name : STM32L4Rxxx/STM32L4Sxxx
Flash size  : 2 MBytes
Device type : MCU
Device CPU  : Cortex-M4

Memory Programming ...
Opening and parsing file: ST-LINK_GDB_server_a04032.srec
  File          : ST-LINK_GDB_server_a04032.srec
  Size          : 57656 Bytes
  Address       : 0x08000000

Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 14]
Download in Progress:

File download complete
Time elapsed during download operation: 00:00:01.926
Encountered Error when opening C:/RT-ThreadStudio/platform/ST-LINK/tools/bin\STM32_Programmer_CLI.exe
 ------ Switching context ----- 
Hardware watchpoint supported by the target 
SWD frequency = 4000 kHz
ST-LINK Firmware version : V2J33S25
Device ID: 0x470
PC: 0x8009f9c
ST-LINK detects target voltage = 3.26 V
ST-LINK device status: HALT_MODE
ST-LINK device initialization OK
Error in STM32CubeProgrammer
Debugger connection lost.
Shutting down...

![捕获.PNG](https://oss-club.rt-thread.org/uploads/202001/06/172104pt2e8wzn9ydsgglq.png)