你好，我使用的硬件是ARTPI平台，现在想使用QBOOT的OTA功能，发现通过YMODEM下载下去的RBL文件后，每次都检测到download里面有固件，然后释放到APP 分区，每次只能释放到11%，就出现写入错误。
检查了QBOOT版本，以及FAL，都没有发现问题。
APP分区是属于QSPI W25Q128另外一个芯片，RTTHREAD的版本是4.1.0,4.0.3也试过，都是一样的错误，能提供一下帮助吗？ 谢谢！
Qboot version : V1.0.7 2024.06.03 Product name : ART-Pi QBOOTProduct version : v1.00 2021.02.07 Product mcu : stm32h750 Press [Enter] key into shell in 3 s : Start erase partition app ...Start release firmware to app ... 11%[E/FAL] (fal_partition_write:471) Partition write error! Flash device(norflash1) write error![E/Qboot] Qboot release firmware fail. write destination error, part = app, addr = 00008000[E/Qboot] Qboot firmware update fail. firmware release fail.[E/Qboot] No legitimate application.[I/Qboot] Try resume application from downloadStart erase partition app ...Start release firmware to app ... 11%[E/FAL] (fal_partition_write:471) Partition write error! Flash device(norflash1) write error![E/Qboot] Qboot release firmware fail. write destination error, part = app, addr = 00008000[E/Qboot] Qboot firmware update fail. firmware release fail.[I/Qboot] Try resume application from factory[E/Qboot] Qboot firmware check fail. partition "factory" infomation check fail.
