吐槽一下关于中断使用问题

发布于 2013-01-17 09:34:34 浏览：4290 订阅该版

10 个回答

prife 2013-01-17

这家伙很懒，什么也没写！

bernard 2013-01-17

这家伙很懒，什么也没写！

prife 2013-01-17

这家伙很懒，什么也没写！

bernard 2013-01-17

这家伙很懒，什么也没写！

joyhope 2013-02-26

这家伙很懒，什么也没写！

不知道类似这种注释的模板是否能解决问题，在代码里面直接写这个，然后有工具直接生成HTML， 风格还是很好的。学习也很简单，和JAVA DOC 类似。

>/**
> *  
> * @defgroup HAL_ADC HAL ADC Controller
> * This chapter contains descriptions of the configuration structure and 
> * functions available to access the ADC Controller (Analog to Digital 
> * Converter).
> * 
> * @section Overview Overview 
> * 
> * li 6 input channels selected through an analog multiplexer 
> * li From 2 to 10-bit resolution conversion, selected on the fly 
> * li Burst mode 
> * li Maximum conversion rate 400 k samples/s for 10-bit resolution 
> * li Power down mode performing minimal power dissipation 
> * li Internal power management to switch off unused circuitry between 
> * conversion cycles 
> * li No start-up cycles, no power down/power up recovery time 
> * li Mixed reference voltage inputs 
> * 
> * @addtogroup HAL_ADC
> * 
> * @{
> */
>
>
>/*----------------------------------------------------------------------------
> * Defines
> *---------------------------------------------------------------------------*/
>
>/* ADC status */
>/** This status indicator is raised when the analog part of the converter is 
> *  off */
>#define HAL_ADC_STATUS_POWER_DOWN   0x0010
>/** This status indicator is raised when a converted data is available */
>#define HAL_ADC_STATUS_END          0x4000

---