10 程序改成带boot的app程序,串口中断接收变的不好使了

发布于 2022-07-02 01:10:53 浏览：610 订阅该版

用RT-THREAD STUDIO 写的STM32F103VC程序,正常测试没有问题,改成带boot的app程序,串口接收就不好使了,只要一接收数据就卡死,然后看门狗超时重启,5个串口中断接收都有问题,1-4串口改成DMA+超时中断方式后通讯没有问题,可是UART5没有DMA,只能用中断串口接收方式,发送数据是没有问题的
![微信截图_20220702004623.png](https://oss-club.rt-thread.org/uploads/20220702/9fe98a636c6d06fe16ea8ee2c7a8103a.png "微信截图_20220702004623.png")![微信截图_20220702004719.png](https://oss-club.rt-thread.org/uploads/20220702/596d0dfcd3964c08e964baabaf399a90.png "微信截图_20220702004719.png")![微信图片_20220702004906.png](https://oss-club.rt-thread.org/uploads/20220702/a11a466e4064ecbb98525f2529068a8d.png "微信图片_20220702004906.png")![微信截图_20220702005037.png](https://oss-club.rt-thread.org/uploads/20220702/f355ab4ae1fa732648597cfd6d1b1041.png "微信截图_20220702005037.png")![微信截图_20220702005110.png](https://oss-club.rt-thread.org/uploads/20220702/1f24525e5fe32134e0777fefa2280ccd.png.webp "微信截图_20220702005110.png")![微信图片_20220702005508.png](https://oss-club.rt-thread.org/uploads/20220702/0f51affbc812a7a39e33e2b76ede14ee.png "微信图片_20220702005508.png")![微信截图_20220702010749.png](https://oss-club.rt-thread.org/uploads/20220702/18a3d6cbc4d4b3e0e3b19c91eb21ea64.png "微信截图_20220702010749.png")

红枫认证专家 2022-07-02

这家伙很懒，什么也没写！

陈云鹏 2022-07-02

这家伙很懒，什么也没写！

陈云鹏 2022-07-02

这家伙很懒，什么也没写！

void jump_app(void)
{
    if(checkApp())
    {
        update_data.UARTx = 1;
        update_SendStatusData("jump_app_OK", sizeof("jump_app_OK"));
        update_data.UARTx = 3;
        update_SendStatusData("jump_app_OK", sizeof("jump_app_OK"));
        update_data.UARTx = 4;
        update_SendStatusData("jump_app_OK", sizeof("jump_app_OK"));
        update_data.UARTx = 5;
        update_SendStatusData("jump_app_OK", sizeof("jump_app_OK"));
        HAL_UART_DeInit(&huart1);
        HAL_UART_DeInit(&huart3);
        HAL_UART_DeInit(&huart4);
        HAL_UART_DeInit(&huart5);
        __HAL_UART_DISABLE_IT(&huart1, UART_IT_IDLE);
        __HAL_UART_DISABLE_IT(&huart3, UART_IT_IDLE);
        __HAL_UART_DISABLE_IT(&huart4, UART_IT_IDLE);
        __HAL_UART_DISABLE_IT(&huart5, UART_IT_IDLE);
        __HAL_UART_DISABLE_IT(&huart1, UART_IT_RXNE);
        __HAL_UART_DISABLE_IT(&huart3, UART_IT_RXNE);
        __HAL_UART_DISABLE_IT(&huart4, UART_IT_RXNE);
        __HAL_UART_DISABLE_IT(&huart5, UART_IT_RXNE);
        HAL_DeInit();
        iap_load_app(FLASH_APP_BAK);
    }
    else
    {
        update_data.UARTx = 1;
        update_SendStatusData("jump_app_NG", sizeof("jump_app_NG"));
        update_data.UARTx = 3;
        update_SendStatusData("jump_app_NG", sizeof("jump_app_NG"));
        update_data.UARTx = 4;
        update_SendStatusData("jump_app_NG", sizeof("jump_app_NG"));
        update_data.UARTx = 5;
        update_SendStatusData("jump_app_NG", sizeof("jump_app_NG"));
        iap_load_app(FLASH_BOOT_ADDR);
    }
}

跳转APP程序增加了恢复UART设置语句,还是不行