art-pi 在使用KEIL下载程序后，再次使用RTT Studio出现错误

发布于 2021-06-16 18:52:58 浏览：950 订阅该版

3 个回答

郝飞juju 2021-06-16

这家伙很懒，什么也没写！

错误如下
D:\RT-ThreadStudio\repo\Extract\Debugger_Support_Packages\STMicroelectronics\ST-LINK_Debugger\1.6.0\tools\bin>D:\RT-ThreadStudio\repo\Extract\Debugger_Support_Packages\STMicroelectronics\ST-LINK_Debugger\1.6.0\tools\bin\STM32_Programmer_CLI.exe -c port=SWD --extload D:\RT-ThreadStudio\workspace\TEST1\board\stldr\ART-Pi_W25Q64.stldr mode=NORMAL -d "D:\RT-ThreadStudio\workspace\TEST1\Debug\rtthread.elf" -hardRst -s 
      -------------------------------------------------------------------
                       STM32CubeProgrammer v2.7.0-RC1                  
      -------------------------------------------------------------------
Warning: The external loader file does not exist:
mode=normal
ST-LINK SN  : 0668FF554957886687092740
ST-LINK FW  : V2J35M26
Board       : --
Voltage     : 3.27V
SWD freq    : 4000 KHz
Connect mode: Normal
Reset mode  : Software reset
Device ID   : 0x450
Revision ID : Rev V
Device name : STM32H7xx
Flash size  : 128 KBytes
Device type : MCU
Device CPU  : Cortex-M7
Memory Programming ...
Opening and parsing file: rtthread.elf
  File          : rtthread.elf
  Size          : 145680 Bytes
  Address       : 0x90000000 
Erasing memory corresponding to segment 0:
Erasing external memory sectors [0 35]
Download in Progress:
Progress: 100%
File download complete
Time elapsed during download operation: 00:00:04.452
Error: Unable to reset MCU!
RUNNING Program ... 
  Address:      : 0x8000000
Application is running
Start operation achieved successfully
执行完毕, 耗时：4649ms.