stm32f103 WQ25xx初始化失败

发布于 2019-10-21 16:53:32 浏览：1550 订阅该版

软件：tag中的3.1.3版本，bsp是stm32f10x-HAL
硬件：WQ25Q128，连在spi1上面
现象：读取不到flash信息，示波器量了有CLK和写数据，没有读数据
日志信息如下：
```DEV_W25QXX:GPIO Init Pass in rt_dev_w25qxx_cs_init.
name = hw_spi_1
object = hw_spi_1 
DEV_W25QXX:Bus Attach Pass in rt_dev_w25qxx_attachcs.
DEV_W25QXX:device w25qxx attach cs success.
flash_device_name = flash0,spi_device_name = spi_dev
name = spi_dev
object = spi_dev
rt_spi_device = spi_dev
rt_spi_device = 4
SPI->CR1=0x0000034c
SPI->CR2=0x00000000
SPI->SR=0x00000002
SPI->DR=0x00000000
SPI->CRCPR=0x00000007
SPI->RXCRCR=0x00000000
SPI->TXCRCR=0x00000000
SPI->I2SCFGR=0x00000000
SPI->I2SPR=0x00000000
message.send_buf=200082b8
get[0]= 0, message.recv_buf=200082b4
get[1]= 0, message.recv_buf=200082b5
get[2]= 0, message.recv_buf=200082b6
11get[0]= ff, message.recv_buf=200082b4
11get[1]= ff, message.recv_buf=200082b5
11get[2]= ff, message.recv_buf=200082b6
id_recv[0] = 255,id_recv[1] = 255,id_recv[2] = 255
Manufacturers ID error!
JEDEC Read-ID Data : FF FF FF
device init fail in rt_dev_w25qxx_init.
```

再次确认：用我们其他项目的使用标准库的代码是可以读到flash信息的。

请问有谁用这个bsp读取访问过flash吗，求教