eclipse下用jlink调试STM32F102RB不成功

发布于 2013-09-20 17:04:36 浏览：2788 订阅该版

[tocm]

我用的是STM32F102RB，按照教程
[http://www.rt-thread.org/dokuwiki/doku. ... 3%E8%AF%95](http://www.rt-thread.org/dokuwiki/doku.php?id=%E9%85%8D%E7%BD%AEeclipse%E9%9B%86%E6%88%90%E5%BC%80%E5%8F%91%E7%8E%AF%E5%A2%83_%E7%BC%96%E8%AF%91_%E8%B0%83%E8%AF%95)
直接烧录可以，但调试不行，最后出来下面信息
......
monitor writeu32 0xE000ED08 = 0x00000000
kill
Quit (expect signal SIGINT when the program is resumed)

我Initialize commands下的配置是
# connect to the J-Link gdb server
    target remote localhost:2331
# Enable flash download and flash breakpoints.
# Flash download and flash breakpoints are features of
# the J-Link software which require separate licenses 
# from SEGGER.
# Select flash device
    monitor flash device = STM32F103RB
# Enable FlashDL and FlashBPs
    monitor flash download = 1
    monitor flash breakpoints = 1
# Clear all pendig breakpoints
    monitor clrbp
# Set gdb server to little endian
    monitor endian little
# Set JTAG speed to 5 kHz
    monitor speed 5
# Reset the target
    monitor reset
    monitor sleep 100
# Set JTAG speed in khz
    monitor speed auto
# Vector table placed in Flash
    monitor writeu32 0xE000ED08 = 0x00000000

Run commands下是
monitor reg r13 = (0x00000000)
monitor reg pc = (0x00000004)
break ResetHandler
break main
continue

请问有谁知道如何解决？