串口通信，为什么实现不了啊

发布于 2023-08-04 16:25:48 浏览：563 订阅该版

1 个回答

张世争 2023-08-04

学以致用

WS_NIU 2023-08-04

这家伙很懒，什么也没写！

```c
#include <rtthread.h>

#define SAMPLE_UART_NAME       "uart2"      /* 串口设备名称 */

/* 串口接收消息结构*/
struct rx_msg
{
    rt_device_t dev;
    rt_size_t size;
};
/* 串口设备句柄 */
static rt_device_t serial;
/* 消息队列控制块 */
static struct rt_messagequeue rx_mq;

/* 接收数据回调函数 */
static rt_err_t uart_input(rt_device_t dev, rt_size_t size)
{
    struct rx_msg msg;
    rt_err_t result;
    msg.dev = dev;
    msg.size = size;

result = rt_mq_send(&rx_mq, &msg, sizeof(msg));
    if ( result == -RT_EFULL)
    {
        /* 消息队列满 */
        rt_kprintf("message queue full！\n");
    }
    return result;
}

static void serial_thread_entry(void *parameter)
{
    struct rx_msg msg;
    rt_err_t result;
    rt_uint32_t rx_length;
    static char rx_buffer[RT_SERIAL_RB_BUFSZ + 1];

while (1)
    {
        rt_memset(&msg, 0, sizeof(msg));
        /* 从消息队列中读取消息*/
        result = rt_mq_recv(&rx_mq, &msg, sizeof(msg), RT_WAITING_FOREVER);
        if (result == RT_EOK)
        {
            /* 从串口读取数据*/
            rx_length = rt_device_read(msg.dev, 0, rx_buffer, msg.size);
            rx_buffer[rx_length] = '\0';
            /* 通过串口设备 serial 输出读取到的消息 */
            rt_device_write(serial, 0, rx_buffer, rx_length);
            /* 打印数据 */
            rt_kprintf("%s\n",rx_buffer);
        }
    }
}

static int uart_dma_sample(int argc, char *argv[])
{
    rt_err_t ret = RT_EOK;
    char uart_name[RT_NAME_MAX];
    static char msg_pool[256];
    char str[] = "hello RT-Thread!\r\n";

if (argc == 2)
    {
        rt_strncpy(uart_name, argv[1], RT_NAME_MAX);
    }
    else
    {
        rt_strncpy(uart_name, SAMPLE_UART_NAME, RT_NAME_MAX);
    }

/* 查找串口设备 */
    serial = rt_device_find(uart_name);
    if (!serial)
    {
        rt_kprintf("find %s failed!\n", uart_name);
        return RT_ERROR;
    }

/* 初始化消息队列 */
    rt_mq_init(&rx_mq, "rx_mq",
               msg_pool,                 /* 存放消息的缓冲区 */
               sizeof(struct rx_msg),    /* 一条消息的最大长度 */
               sizeof(msg_pool),         /* 存放消息的缓冲区大小 */
               RT_IPC_FLAG_FIFO);        /* 如果有多个线程等待，按照先来先得到的方法分配消息 */

/* 以 DMA 接收及轮询发送方式打开串口设备 */
    rt_device_open(serial, RT_DEVICE_FLAG_DMA_RX);
    /* 设置接收回调函数 */
    rt_device_set_rx_indicate(serial, uart_input);
    /* 发送字符串 */
    rt_device_write(serial, 0, str, (sizeof(str) - 1));

/* 创建 serial 线程 */
    rt_thread_t thread = rt_thread_create("serial", serial_thread_entry, RT_NULL, 1024, 25, 10);
    /* 创建成功则启动线程 */
    if (thread != RT_NULL)
    {
        rt_thread_startup(thread);
    }
    else
    {
        ret = RT_ERROR;
    }

return ret;
}
/* 导出到 msh 命令列表中 */
MSH_CMD_EXPORT(uart_dma_sample, uart device dma sample);

```